Click to play the video!🥰🖕🖕🖕🖕🖕🖕🖕🖕

Medium PDR Kit 2#	Big PDR Kit 1#	Big PDR Kit 2#
10pcs PDR Rods+LED Board	Big PDR Kit 1#+10 Rods	Big PDR Kit 2#+10 Rods

Product details:

	2 in 1 T-bar Dent Puller Material: Stainless Steel How to work 1. Install the T-bar puller first. 2. Align the T-bar puller and press the glue tab 3. Pull the slide hammer backwards to pull up the dent 4. Check the dent. If dent still exists, you can choose other appropriate glue tab to continue repair the dent, just need to repeat the whole process.
	Dent Lifter Material: Aluminum+Stainless Steel+Soft Plastic Pads Versatile: Adjustable black dent puller can repair large dents up to 4.05 inches, with 17 different size labels, not only can be used to remove car dents, but also refrigerators, motorcycle bodies, washing machines and Hail damage.
	Bridge Dent Puller Material: Stainless Steel + Plastic √ Professional design - Using the principle of leverage to design the dent puller is ergonomic, the dent bridge puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficient and labor. √ Protecting the original paint - The dent puller is made of advanced plastic.   in the parts of the body contact with high-quality foam bottom, can avoid damage to the original paint.
	10x Paintless Dent Removal Tools   Newest professional Stainless Steel Whale Tails Paintless Dent Repair rods suit for professional technicians to repair dents hail damage and door dings. Products are shipped from the United States.Quickly and Easily! Rods materials: Stainless Steel, not easy to bend,not rust,very sturdy and durable.will not damage at the original paints.You need not to repaint the surface of the vehicle.

 

How to use steel bars? Please click on the Video 👇 👇 👇 👇 

 

 

	Hot glue gun and glue sticks Our glue gun can melt the glue sticks quickly, and our glue sticks have high viscosity, which ensures that the tabs stick the dents strongly and will not be pulled off when repairing.
	Dent Repair Reflector Panel The dent repair reflector panel is used to check the dent on the flat surface of the vehicle, and the position of the dent can be found by the alignment line. If the distorted image or the line in the reflection becomes parallel, it means that you have successfully removed the dent.
	Rubber Hammer Allow you to knock away annoying dents with ease. Quickly repair the protruding and irregular dents. No damage to the surface. Removable rubber head, no damage to the surface, wear resistant.
	Dent puller tabs Not easy to break, can be reused. Professional dent puller tabs for colorless automatic dent repair. Different size dent pullers are suitable for almost all dents and hail damage.
	Carry Bag Comes with a large carrying bag for easy storage of car tools.

 

Don't know the usage details?(24 hours online consultation)

Q: Does this dent puller hurt the original car paint?
A: Professional design to avoid damage to car paint, this is not to hurt paint depression repair tools.
Q: How big is the depression that this tool can fix?
A: This is a small dent repair tool that can be repaired in 1-4 inches.
Q: Could I use this tool to fix dent in some places?
A: It can repair car body, motorcycle, refrigerator, washing machine, stainless steel door, metal surface damage repair etc.
Q: Can a non-professional car repairer buy it?
A: This dent removal tool is suitable for all people who are willing to work manually. It only takes four steps and is very simple and convenient.

Basic Steps of Dent Repair

1. Mark the dent with with marking pen.
2. lnsert the glue stick into the glue gun and heat the stick for 3-5 minutes.
3. Apply the melted glue on the tab, remember to start from the center of tab and make sure the glue is even and full.
4. Align the tab with the center of the dent and slightly press the tab for 3-5 minutes until it cools down and the tab is fixed on the dent.
5. Choose different tools for different types of dents and follow corresponding step:

-Slide Hammer: Buckle the T-puller till it's fastened, hold the handle of the puller and carefully hit the slide hammer to pull the dents, repeat the process until the the surface is flat or slightly bulges. Notice: do not pull too fiercely or the tab could fall off.
-Dent Lifter: Buckle the lifter till it is fastened, hold the handle gradually to pull the dent, repeat several times till the surface of the dent flattens or slightly bulges. Notice: do not pull too fiercely or the tab could fall off.
-Bridge Puller: Put the screw part of the tab through the hole in the middle of the bridge. Install the nut and screw it carefully till the surface of the dent flattens or slightly bulges. Notice: do not pull too fiercely or the tab could fall off.

6. If the result is not so ideal, use hammer and tap-down-pen to improve the result slowly, the tap-down-pen has replaceable tips, for beginners we the flat one will be recommended.
7. Remove the glue tabs and glue with scraper, if they are hard to remove, spray some alcohol first and then try again.

Packing(Please see the picture for details)

The item list contains a variety of purchase options, and we will ship according to your selection. If you have any questions, feel free to contact us!