We all have OTTO CHEMISTRY Products in the range.
OTTOFLEX® object sealing tape
The sealing tape
Special elastomer tape fully fleece-laminated on both sides
For indoor and outdoor
application areas
Composite sealing in damp and wet rooms under ceramic coverings and natural stone
Sealing at the abutting edges or Component transitions
Sealing in the corner formation to bridge cracks and joints
Characteristics
Very elastic, resistant to aging and tear-resistant
Compatible with commercially available tile adhesives and solvent-free coatings
Secure connection with OTTOFLEX® liquid film / sealing slurry / sealing membrane / sealing and decoupling membrane
Compatible with OTTO sealants and adhesives
Standards and tests
Corresponds to the water impact classes W0-I, W1-I, W2-I and W3-I for crack class R1-I according to din 18534
Corresponds to water impact class W1-B for crack classes R0-B and R1-B for container locations S1-B and S2-B according to din 18535
Corresponds to moisture resistance classes A0 and B0 according to ZDB and abP A, B, C
Corresponds to stress classes W1, W2, W3, W4, W5 and W6 according to ÖNORM B 3407
Tested according to din EN 1928 (version B) water impermeability test
French VOC emission class A+
EMICODE® EC 1 Plus - very low emissions
Color
blue
OTTOFLEX® sealing tape
The premium sealing tape for optimal processing
Special elastomer tape fully fleece-laminated on both sides
For inside and outside 10 band and 12 band
application areas
Composite sealing in damp and wet rooms under ceramic coverings and natural stone
Sealing at the abutting edges or Component transitions
Sealing in the corner formation to bridge cracks and joints
Characteristics
Extremely elastic, resistant to aging, highly tear-resistant
Compatible with commercially available tile adhesives and solvent-free coatings
Compatible with OTTO sealants and adhesives
Secure connection with OTTOFLEX® liquid film / sealing slurry / sealing membrane / sealing and decoupling membrane
Crease marking for optimal processing
Meter scaling
Standards and tests
Tested according to the testing principles for issuing a general building inspection certificate for sealing materials to be processed in liquid form in conjunction with tile and slab coverings Section 3.5.6 (September 2004 edition) - Application of a water pressure of 3.0 bar over 7 days
Corresponds to the water impact classes W0-I, W1-I, W2-I and W3-I for crack class R1-I according to din 18534
Corresponds to water impact class W1-B for crack classes R0-B and R1-B for container locations S1-B and S2-B according to din 18535
Corresponds to moisture resistance classes A0 and B0 according to ZDB and abP A, B, C
Corresponds to stress classes W1, W2, W3, W4, W5 and W6 according to ÖNORM B 3407
French VOC emission class A+
EMICODE® EC 1 Plus - very low emissions
Color
blue
Delivery form:
Selection of variants
Safety notice:
Keep out of reach of children.
Always read the label and product information before use.