Excellent Adhesion and Elasticity in Silver Conductive Paste for Films
Description


Feature:


- brand new and high quality
- Made of high quality materials,
- It is very easy to use.
- for for repairing defective traces/tracks or creating smooth jumpers on PCB boards.
- Can be used to repair membrane switches.
- This silver paste is developed and designed to be used in the membrane key switch and flexible circuit board industries. When the baking temperature is above 140℃ for 30 minutes, excellent electrical and physical properties can be obtained. It can be used on materials such as PET and PC, and has good printability, conductivity and oxidation resistance.
- Low resistance: The inorganic silver powder nanoparticles are uniformly dispersed in the organic, so this silver paste has good printability and low resistance.
- Good hardness: The solidified silver paste has a dense structure and good hardness, which gives good electrical conductivity and wear resistance.
- Good adhesion: excellent elasticity and excellent adhesion to polyester film.
- Good winding performance: After folding in half, press it with a 2KG for 60 seconds, the front and back are folded once, and the impedance value does not increase by more than 300% of the bending times.
- for for rigid and flexible substrates. Widely used in household products, (such as refrigerators, water dispensers, induction cookers, electric kettles, etc.) electrical appliances (such as power supplies, inventions, relays, thyristors, etc.), computer CPU, LED display, liquid crystal display, optical fiber communication equipment, control heat dissipation chips, Heat sinks, LEDs, etc.

How to use:

- Apply silver glue/paste where needed.
- After covering the desired track, wait an hour to dry.
- If you want to dry quickly, just blow it with a hair dryer for 5-10 minutes.


Product parameters:

- Length: about 15.5 cm (6.1 inches)
- Capacity: 0.1ML, 0.4ML, 0.6ML, 0.8ML, 0.9ML (optional)
- Quantity: 1 piece
- Color: blue etc.
- Viscosity: 20000 (Pa·S)
- Particle size: resistance < 0.02 ohm/sq, film thickness of 12 microns (um)
- Solid content WT%: 66
- Viscosity poise: 260±50
- Pencil hardness H: >3


Packing list:

1*Silver conductive-glue wire (optional)

Notes:

1. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
2. Please allow a slight deviation between the data and the manual measurement.

Polices

 

We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.

 

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

 

It takes about 7-15 working days to UK; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

 



We accept payment via Paypal only.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.


 

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.



DataCaciques