ZOOM PodTrak P8 Multitrack Podcast Recorder Brand New Unused Beautiful Item

Simplify your podcasts]

Mix, record, and edit. PodTrak P8 has everything you need to create a podcast show. Simple and intuitive operation, efficient workflow. The birth of an all-in-one podcast studio that allows you to comfortably create professional programs.

[Touch operation for settings and editing]

Most of the main functions can be operated on the color touch screen, from monitoring and adjusting each track to onboard editing. Create your own podcast with just the taps and slides of your finger.

[Mic preamp slider]

Adjust the input gain of each microphone so that the peak of the microphone signal falls within the "Good" range of the level meter. Please note that if you go into the "Over" range, the sound may become distorted.

[Limiter]

Prevents the sound from becoming distorted when the volume increases momentarily.

[Low Cut]

Cuts low frequencies to reduce air conditioning noise, wind noise, voice pop noise, etc.

[Tone Adjustment]

Adjust the tone by emphasizing the low and high range of your voice.

[Compressor/De-esser]

A compressor that evens out changes in voice volume and a de-esser that reduces saline noise (sibilance). The combination of the two creates a voice that is easy to listen to.

[Noise Reduction]

When you select Noise Reduction on the ON AIR settings screen, the microphone level of tracks with no input will be automatically lowered to reduce ambient noise.

[Supports Japanese display]

Various settings/menus on the touch screen can be displayed in Japanese. You can also switch between English, French, German, Spanish, and Italian.

[Color-coded by channel]

"PodTrak P8" has 6 microphone inputs and 6 headphone outputs, and can record podcasts for up to 6 people. Each channel has the same color from input to output, making it easy to see who is using which color channel.

[Higher-grade sound quality]

Equipped with 6 high-quality microphone preamps that can clearly record the voices of performers. Gain up to 70dB is possible, allowing use of low output level microphones such as the Shure SM7B and Heil PR 40. You can deliver high-quality voices that are easy to hear to listeners.

[“This call is being recorded”]

“PodTrak P8” is equipped with a recording channel exclusively for guests participating by phone. Channel 6 can also be switched to USB mode, allowing you to record the voices of guests who joined via computer. In either case, the mix-minus feature prevents audio feedback and echo during calls.

[ON AIR key]

If the ON AIR key for each channel is off, the audio for that channel can be monitored with headphones, but it will not be sent to the speakers or USB (audio for live streaming), and it will not be sent to the stereo file for podcasting. Not recorded. This is useful for conversations unrelated to the content of the podcast, such as small instructions, or when preparing for guest participation during a break in a song.

[Connect wirelessly]

If you use the optional Bluetooth adapter/audio "BTA-2" (sold separately), you can wirelessly connect "PodTrak P8" to your smartphone and record the voices of remote guests.

[Let's play a jingle♪]

Equipped with 9 multi-colored sound pads, it is possible to play pre-recorded sound sources such as sound effects, BGM, jingles, and pre-recorded interviews in real time. In addition to 13 preloaded sounds to choose from, you can also load original sounds into the main unit. You can prepare a total of 36 types of these sounds in 4 banks, and you can easily pop them out at any time.

[Flexible Output]

Equipped with 6 headphone terminals with individual volume adjustment. When recording, you can monitor at a comfortable volume using each headphone. The main output can be connected to studio monitors, and you can also check it out through speakers when editing audio.

[Edit onboard]

PodTrak P8's built-in editing functions allow you to easily trim, split, fade, etc. audio clips, making it convenient for podcast production. You can also transfer the track's audio files to your computer, where you can create the final mix.

[Take out the studio]

``PodTrak P8'' can record up to 2 hours with 4 AA batteries. Convenient for recording on the go. You can also use a commercially available USB mobile battery to extend the battery life.

[Audio interface function]

``PodTrak P8'' is equipped with a USB-C port and can also function as an audio interface when connected to a computer. It can also be used for recording and live streaming on your computer.

[Included items]

・PodTrak P8

・AD-14 AC adapter

・Quick guide

[Main features]

・Podcast recording for up to 6 people (6 pairs of microphones and headphones can be connected)

・Smartphone that can record the audio of telephone guests Equipped with a TRRS terminal for connection and a dedicated track

・4.3-inch full-color touch screen that also supports Japanese display ・Live streaming with

INPUT SELECT switch, fader, level meter, PHONES volume, ON AIR button, color-coded for each channel

/ Audio for stereo mix recording can be selected for each channel

・Various correction functions optimized for "voice" (limiter, low cut, tone, compressor/de-esser)

・Audio editing functions to complete the broadcast episode (trim, division, fade, loudness normalization, BGM addition, MP3 conversion)

・Calls Mix-minus function that automatically removes feedback from the previous audio

- 9 sound pads (x4 banks) to which audio files can be assigned

- 2-in/2-out USB audio interface with mix-minus function (Win/Mac/iOS/ (Compatible with Android)

- Direct recording to SDHC/SDXC cards up to 512GB

- Runs for about 2 hours on 4 AA alkaline batteries, or can also be powered by USB bus power

- Includes Steinberg WaveLab Cast bundled with microphone and headphones for podcast recording. Bluetooth adapter/audio "BTA-2" (sold separately

) that can wirelessly transmit and receive smartphone audio

[Specifications]

[Number of input/output channels]

Number of input channels Microphone input: 6 (monaural) Smartphone input: 1 (stereo) )

Number of output channels 2 (headphones x 6, speaker out L/R)

[Connection terminals]

MIC

・Specifications: XLR jack (No. 2 HOT)

・Input gain: 0 to + 70 dB

・Input impedance: 3 kΩ

・Maximum input Level: +5 dBu (@0dBFS)

・Phantom power: +48 V

Smartphone connection terminal

・Specifications: TRRS mini jack (4 poles/TIP: L, RING1: R, RING2: GND, SLEEVE: MIC)

・Input impedance: 3 kΩ

・Maximum input level: +2.5 dBu

USB

・USB Type-C (audio interface function, mass storage function)

*Please use a USB cable that supports data transfer. Compatible with USB bus power.

Headphones

・Specifications: 3.5 mm stereo mini

・Maximum output level: 20 mW + 20 mW @32 Ω

・Output impedance: 27 Ω

Speaker out

・Specifications: TRS jack (balanced)

・Maximum output level: +5.5 dBu

・Output impedance: 320 Ω

AC adapter

/Power

terminal for AD-14 Recorder

/Format: WAV 44.1 kHz, 16-bit monaural/stereo

Recording media: SDHC standard compatible card 4 GB to 32 GB (Class 10 or higher)

SDXC standard compatible card 64 GB to 512 GB (Class 10 or higher)

Audio interface: 44.1 kHz, 16-bit, 2in2out

[Audio interface operating environment]

・WINDOWS

OS: Windows 10 Version 1703 or higher (32bit, 64bit)

CPU: Intel Core i3 or higher *

USB: USB 3.0 / 2.0 **

* Operation is not guaranteed for Atom, Celeron, Pentinum series and AMD CPUs ** Only USB host controllers with built-in Intel chipset are supported, operation is not guaranteed for use with USB hubs and expansion cards

- MAC

OS: macOS 10.13 / 10.14 / 10.15

CPU: Intel Core i3 or higher

USB: USB 3.0/USB 2.0 *

* Operation is not guaranteed when used with a USB hub or expansion card)

IPHONE / IPAD

OS: iOS 12 / 13

* Apple Lightning-USB camera adapter is required separately

・ANDROID OS

Android OS 7 / 8 / 9 / 10

Frequency characteristics: -1.0 dB: 20 ​​Hz to 20 kHz @44.1 kHz Sampling

input conversion noise: -124 dBu or less (IHF-A) @+70 dB, 150 Ω input

display: 4.3" full color LCD (480 x 272), touch screen

Power source: 4 AA batteries (alkaline batteries, nickel metal hydride batteries, lithium batteries)

AC adapter (ZOOM AD-14): DC 5 V/1 A

* Compatible with USB bus power.

Approximate battery life during continuous use:

44.1 KHZ/16-BIT 4CH Recording to SD card (+48 V OFF, headphone 32 Ω load): Alkaline battery: approximately 2 hours, nickel metal hydride battery (1900 mAh) ): Approximately 3.5 hours, Lithium dry battery: Approximately 6.5 hours

*The above values ​​are only a guide. *Battery duration is based on our test method. It varies greatly depending on the usage conditions.

Handling Time:

We strive to ship all orders within 7business day of payment.

I promise to deliver our products toyou safely, securely, and carefully.

*During the end of November to the end of December, most ofshipping will be delayed, so please order for Christmas in November.

*Shipping is only available toregistered addresses. Please note that we cannot ship to addresses thatare not registered.              

*We are currently experiencing unstable delivery in some areas dueto the Corona influences. Please check your tracking number or contactyour local shipping office if your order is arriving much later than expected.