Electric Hand Held Concrete Vibrator Air Bubble Remover 800W Construction Tool
 800W Electric Concrete Vibrator Construction Tool Air Bubble Remover 1.2m Hose
 
Hand Held Concrete Vibrator, is a kind of professional construction tool machine, widely used in construction places. Easy to operate, the electric concrete vibrator is essential to construction use, ensuring the fastness of buildings. Vibrate pouring concrete to make it dense. It suits for both construction sites and home.
 
NOTE

To assemble the hose to the unit: it is a reverse thread.

 
 
How to use
 
Maintenance and inspection
 
Before any work on the machine itself, pull the mains plug.
 
The brushes should be checked periodically and warm-out brushes should be replace in time,after replacing,inspect,whether the new brushes can move freely in the brush holder,keep running the motor for 15 minutes to match the contact of brushes and commentators.
 
Keep the ventilation slots clear from dirt , clean off the accumulated dust and oil dirt periodically.
 
During normal operation , if anything happens ,the power supply should be cut off at once and the tool should be checked and repaired
 
Regular inspect all mounting screws and ensure that they are properly tightened, should any of the screws be loosen,Tighten them immediately, failure to do so could result in personal injury
 
Do not expose the tool to rain , Do not use power tools in damp or wet location ,keep work area well lit do not use power tools where there is risk to cause fire or explosion.
 
 
Feature
 
Professional machine
 
Stable voltage 800w, safe to operate
 
Hand held
 
Well constructed with quality materials
 
Powerful and safe concrete vibrator
 
Flexible shaft
 
Hard Nose with flexible shaft for hard to reach places
 
Shaft simply screws on to drive unit, no other tools required
 
Lift time to use
 
High quality and durable
 
Easy to maintenance and inspection
 
Widely used in construction
 
Electric control
 
Easy to use labour saving tool to help settle concrete and remove air bubbles from slabs & footings
 
 
Specifications
 
Rated current: 2.8 A
 
Rated voltage: 110V
 
Frequency: 60Hz
 
Needle diameter: 35 mm
 
Shaft length: 120 cm
 
Total weight: 6.3 kg
 
 
Package Content
 
1 × 800W Concrete Vibrator
 
1 × 1.2m Hose
 
Notes:
1. The thread is the reverse tooth and should be tightened in the reverse direction. The original direction can not be installed, so change the direction.
2. After the vibration rod is installed and energized, the tip of the vibration rod can be generally knocked to the ground, and the vibration rod can be rammed after it sends out a smooth and powerful sound.
PushAuction

DataCaciques