Please read description.

BMW MINI R55 R56 R57 AIRBAG ECU SRS MODULE 93D7 93AB 93A8 FAULT REPAIR SERVICE

THIS IS NOT AN ITEM FOR SALE.

THIS IS A REPAIR SERVICE.

Picture shown are for illustration purpose only! Please read description!

If you have no communication or any other problem please contact us.

Short list of the common Fault codes:

- 93D7
- 93AB
- 93A8

Short list of the SRS modules:

- 65.77 3451779-01
- 65.77 3454345-01
- 65.77 9812297-01
- 65.77 9812296-01
- 65.77 3428715-01
- 65.77 3454346-01
- 65.77 3428715-02
- 65.77 9807169-01
- 65.77 9809354-01

IMPORTANT!

In case you or somebody else has tried to fix the airbag module, we cannot guarantee that your SRS module can be repaired after somebody already tried to work with it. In this case, you need to contact us and we will provide you with a listing for testing service.

All you need to do in 3 easy steps:

STEP 1: Remove your SRS module from your vehicle and match the part numbers of your SRS module and the part numbers stated in title and description in this listing. If part numbers are not stated, please contact us.

STEP 2: Click (Buy it Now) and print a purchase receipt (If you have no printer then please enclose a note with your return details) and send it along with your item to us. Securely pack your item and post it to: Transelot, 50A Lawson Street, Kettering, NN16 8XU.

STEP 3: Once we have received your unit we will repair your unit on the same or next working day and it will be sent back by Royal Mail 1st Class.

INTERNAL FAULT

Sometimes the airbag light on the dashboard will show even if the vehicle has not been in an accident in which the restraint systems were deployed. This normally means that the airbag control unit has developed an internal error which can either be caused by corrupted data or physically damaged hardware or components. An internal error can occur during electrical surges or water intrusion onto the ECU's printed circuit board.

REPLACING YOUR AIRBAG ECU

If you need to replace the airbag ECU the best way to make sure to find one which is compatible with your vehicle is to match the part numbers on the unit itself with the unit that you might potentially buy. Also it's best to make sure that the ECU that you are purchasing does not have crash data stored or indeed an internal error. In case if you had to purchase second hand SRS module, we can program it to your vehicle for extra cost.

THE CRASH DATA RESET

By far the easiest way to get your airbag system back to a fully functional state after the car accident is to reset the original airbag ECU to its original state. (Some internal faults can be caused by the accident itself and so no-one can 100% guarantee that the crash data clearance will work). One of the main advantages to resetting the original airbag ECU from the vehicle is the fact that you won't have the extra cost of re-coding it to your vehicle as the original will already have the correct data for your vehicle.

THE LOCATION OF SRS MODULE

SRS unit is located behind the centre console directly below the radio, bolted to the floor. This is the same on most vehicles. You can't miss it as its a little square unit with yellow connectors at the front.

REMOVING AND REFITTING THE AIRBAG MODULE

It is always advised that you get a professional mechanic to remove and refit the Airbag ECU but if you believe yourself to be competent enough, once you have located and identified the airbag ECU firstly disconnect the negative battery lead, then remove any trim or carpet so that you can access the module's retaining bolts. Remove the bolts and lift the ECU just enough so that you can carefully disconnect the plugs, but make sure you've done it correctly without damaging the ECU. For refitting please do everything in reverse order.