Specifications:
Name: Polyurethane pump high pressure grouting machine Maximum pressure of high pressure pipe: 10000PSI Motor power: 1100W Maximum pressure of switch group: 10000PSI Working pressure: 0- 6000PSI Maximum value of pressure gauge: 10000PSI Warning pressure: 6000-10000PSI Applicable materials: polyurethane grouting fluid, epoxy resin grouting material and other low-viscosity non-particle liquids (similar to engine oil).
Precautions:
1. It is strictly forbidden to test the machine with water, it is easy to cause damage to the pump, and the residual water in the machine will react with the grouting liquid and cause blockage. Please use engine oil for the test machine!
2. Use oil to test the machine before each use to check whether the pressure is normal, whether the connections are tight or leaking, and then pour the grout into the grouting construction if there is no problem.
3. Wear goggles, gloves, and long-sleeved overalls during construction. Otherwise, it is strictly forbidden to operate the machine.
4. The reading of the pressure gauge should be observed in real time during use, and the pressure must not reach the red area of the pressure gauge.
5. After the machine is used, the machine must be cleaned with cleaning agent immediately to prevent the material in the machine from solidifying and blocking the pipeline.
Picture showing:
|