Jura - Premium XXL Service Kit Spare Parts with Oval Head Key | 12885
Item Description:
Extensive maintenance set with special tools and cleaning cloth for Jura fully automatic coffee machines. The set contains all the important seals for the brewing unit, the drainage valve, the water tank connection and the hoses.
An oval head key is included in the maintenance set to open the machine. An original Jura cleaning cloth is also included in the set so that the Jura fully automatic machine can be cleaned gently but thoroughly after the maintenance has been completed. The silicone grease for the seals and the brewing group is food-safe, odorless and tasteless.
In addition, there are a few hose clamps, housing screws, a hose brush and the two retaining rings for the brewing unit shaft in the set. The crema valve for the brewing unit and the repair kit for the outlet valve can be found below in the recommendations.
Important service note:
Older models of the E and F series with plug-in connections on the thermoblock (66820) require up to 7 additional hose seals with item no.: 7758775. These must be ordered separately if required.
Technical information:
The PREMIUM O-Ring has excellent heat and ozone resistance with minimal compression set. Very good resistance to ozone and weather, aging in hot air, lubricants, hot water and steam up to 160°C and aggressive media. The material is ideal for contact with food (FDA-compliant) and also technically suitable for the planned application. The premium seals are designed to last as long as possible. The task of these quality products is to spare you subsequent repairs for as long as possible.
Scope of Delivery:
- 2x premium O-rings for the pistons of the brewing unit
- 2x Premium U-rings in the drainage valve
- 10x premium O-ring for the pressure hose
- 2x premium O-ring for the riser pipe of the brewing unit
- 1x premium O-ring inlet nozzle on the drainage valve
- 1x premium O-ring pump connector
- 2x premium O-ring steam pipe
- 2x lock washers
- 1x premium seal for the water tank (inner distribution sleeve)
- 4x clip water pipe
- 6x housing screws (also for the rear panel)
- 4x applicator for subsequent greasing of the brewing unit
- 1x oval head key as bit insert
- 1x original Jura care cloth for final cleaning
- 1x hose brush
- 6g multi silicone grease (-45 to 200°C)
Compatible Models:
- Franke
- Flair (Type 654)
- Sapphira (Type 790)
- Jura
- C5 Impressa
- C9 Impressa
- C50 Impressa
- C55 Impressa
- C60 Impressa
- C65 Impressa
- C70 Impressa
- C75 Impressa
- C90 Impressa
- C Limited Edition Impressa
- D4
- D6
- D60
- E4
- E5 Impressa
- E6
- E8
- E8 (EB)
- E8 model 2018
- E10 Impressa
- E20 Impressa
- E25 Impressa
- E30 Impressa
- E40 Impressa
- E45 Impressa
- E50 Impressa
- E55 Impressa
- E60 from 2015
- E60 Impressa
- E65 Impressa
- E70 Impressa
- E74 Impressa
- E75 Impressa
- E80 from 2015
- E80 Impressa
- E85 Impressa
- E600
- E800
- ENA 3
- ENA 5
- ENA 7
- ENA 7 Aroma+
- ENA 9
- ENA X1
- F5 Impressa
- F7 Impressa
- F8 Impressa
- F9 from 2015
- F9 Impressa
- F50 Classic Impressa
- F50 Impressa
- F55 Classic Impressa
- F60 Impressa
- F70 Impressa
- F85 Impressa
- F90 Impressa
- F900 expert
- Giga 5
- Giga 6
- Giga W3
- Giga x3
- Giga X3c
- Giga x7
- Giga X7c
- Giga x8
- Giga X8 GII
- Giga X8c
- Giga X8c GII
- Giga x9
- Giga X9c
- Impressa 300
- Impressa 500
- Impressa Cappuccinatore
- Impressa Evolution XT
- Impressa Scala
- Impressa Scala Vario
- Impressa Ultra
- J5 Impressa
- J6
- J7 Impressa
- J9 Impressa
- J9.2 Impressa
- J9.3 Impressa
- J9.4 Impressa
- J10
- J80 Impressa
- J85 Impressa
- J90
- J95
- J500
- S7 Avantgarde Impressa
- S8
- S9 Avantgarde Impressa
- S9 Classic Aroma+ Impressa
- S9 Impressa
- S9 One Touch Impressa
- S50 Impressa
- S55 Impressa
- S70 Impressa
- S75 Impressa
- S80
- S85 Impressa
- S90 Impressa
- S95 Impressa
- WE6
- WE8
- WE50
- X5 Impressa
- X6
- X7 Impressa
- X7-C Impressa
- X7-S Impressa
- X8
- X9 Impressa
- X10
- X70 Impressa
- X90 Impressa
- X95 Impressa
- XF50 Classic Impressa
- XF50 Impressa
- XF70 Impressa
- XF500 Impressa
- XJ5 GII Impressa
- XJ5 Impressa
- XJ6
- XJ9 GII Impressa
- XJ9 Impressa
- XS9 Classic
- XS90 Impressa
- XS90 One Touch Aroma+ Impressa
- XS90 One Touch Impressa
- XS95 Impressa
- XS95 One Touch Aroma+ Impressa
- XS95 One Touch Impressa
- Z5 GII Impressa
- Z5 Impressa
- Z6
- Z6 model 2018
- Z7 Impressa
- Z8
- Z8 model 2018
- Z9 Impressa
Browse by Categories
Product
All products are new and original from the factory. Please see the description about suitable models of particular item or part. If you have any questions, feel free to chat with us in the Contact section and we will happily answer them.
Shipping
All items have free shipping with standard shipping to US 14-30 days. Possible Express shipping - it takes approximately 5-8 working days. If an item is not delivered on time, please contact us before submitting a dispute.
Contact
Your POSITIVE feedback is very important to us. If for any reason you feel that you have not been treated up to the standards and feel like giving NEUTRAL or NEGATIVE feedback, please, kindly contact us - so that we can resolve the issue ASAP. We can only address the concerns that are brought to our attention.