Printing method | Dye sublimation heat transfer method (with overcoat) | |||
Print Resolution | 300 x 300 dpi | |||
Tonal color | 256 shades / color | |||
ink | Exclusive color ink (Y / M / C / Overcoat) | |||
form | Postcard size (photo paper), L size (photo paper), card size (photo paper, full-page sticker paper, 8-part sticker paper, square sticker paper) | |||
Paper Size | Before perforation cutting | After perforation cutting | ||
Postcard Size | 100.0 x 177.0mm | 100.0 x 148.0mm | ||
L size | 89.0 x 148.0mm | 89.0 x 119.0mm | ||
Card Size | 83.0 x 86.0mm | 54.0 x 86.0mm | ||
Full-face sticker paper | 54.0 x 86.0mm | |||
8 Split sticker paper (per 1 sheet) | 22.0 × 17.3mm | |||
Square Sticker Paper | 54.0 x 54.0mm | |||
Printing time*1 | Postcard Size | About 47 seconds | (Approx. 58 sec.) *2 | |
L size | About 39 seconds | (Approx. 49 sec.) *2 | ||
Card Size | Approximately 27 seconds | (Approx. 32 sec.) *2 | ||
Paper source | Automatic paper feeding from paper cassettes | |||
Paper arrangement | Automatic ejection to the top of the paper cassette | |||
monitor | Tilting 3.2-inch TFT LCD color monitor | |||
interface | Hi-Speed USB | PictBridge Compatible devices : TypeA When connected to a computer : Mini-B | ||
memory card | SD memory card, SDHC memory card, SDXC memory card, miniSD memory card*3, miniSDHC memory card*3, microSD memory card*3, microSDHC memory card*3, microSDXC memory card*3 | |||
radio | standard | IEEE802.11b/g | ||
Supported Channels | 1~11hp | |||
Communication Modes | Infrastructure mode*4 | |||
Transmission method | DSSS(IEEE802.11b)、OFDM(IEEE802.11g) | |||
security | No security、WEP、WPA-PSK(AES/TKIP)、WPA2-PSK(AES/TKIP) | |||
USB flash drive | FAT / exFAT ysee y yye | |||
Operating Temperature | 5 ~ 40℃ | |||
Operating humidity | 20 ~ 80% | |||
power supply | compact power adapter CA-CP200 B battery pack NB-CP2LH (sold separately) | |||
Power Consumption | 60 W or less (4 W or less in standby mode) | |||
size | 180.6 × 63.3 × 135.9mm | |||
Weight (body only) | Approximately 860 g | |||
*1 From the start of printing on the yellow side to the completion of paper ejection*2 In parentheses, when [Pattern 1], [Pattern 2], or [Pattern 3] is selected in [Surface Finish ]*3 A dedicated adapter (commercially available) is required *4 Compatible with Wi-Fi Protected Setup |