Description

This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection. Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High-current 43A.

Motor Drive Module, Motor Drive, 43A Drive Module, Motor Driver Module, Current-limiting Controller, Refrigeration Drive Module

Features

- Color: As shown.
- Material: Plastic and metal
- Size: About 7x7x1.5cm.
- 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board.
- Voltage indication of motor driver output end; can solder heat sink.
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2); chip 5 V power supply (can share with MCU 5 V).
- Able to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output.
- Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.

Specifications:

Model: IBT-2
Input voltage: 6V-27V
Maximum current: 43A
Input level: 3.3-5V
Control method: PWM or level
Duty cycle: 0-100%
Input port: 1.RPWM: forward level or PWM signal input, active high
2.LPWM: Reverse level or PWM signal input, active high
3.R_EN: forward drive enable input, high-level enable, low level off
4.L_EN: Reverse drive enable input, high-level enable, low level off
5.R_IS: forward drive current alarm output
6.L_IS: Reverse drive current alarm output
7.VCC: +5 V power output, 5V power supply connection with the microcontroller
8.GND: signal common low end

Motor Drive Module

2 x Driver Module

1.If you have some inquires or problems, Please feel free to contact us.
2.We will reply your email within 1 business day (except weekend).
3.When delivery is delayed or items are damaged during delivery, please email us first before you leave feedback. Thank you.