Officially licensed Ford ® F-150® Raptor R™ Clipless Pro Scale® body

- Molded to scale details: bumpers, grille, tailgate, side mirrors and hood vents

- LED lighting in the front and rear bumpers

- Body reinforcements to prevent pull-through damage

Clipless body assembly

- Holds tight for intense action

- 5mm output shaft

- Quick and easy removal

- Smooth appearance with no body posts or clips

Extremely robust upgrade kit installed

- Made from our toughest, cold-resistant composite material

- Reinforced C-hubs, axle carriers, steering blocks and shock absorber towers

- Extremely robust drive shafts

VXL-3s™ Waterproof Electronic Speed ​​Controller

- Fan with large heatsink

- Traxxas EZ-Set® one-button setup

- Integrated two-stage low voltage detection for LiPo batteries

- NiMH battery packs: 4-9 cells (4.8 to 10.8 volts)

- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)

Traxxas Stability Management® (TSM)

- Improves straight-line acceleration and braking on low-traction surfaces

- Maintains steering stability to enable powerslides when accelerating

- Never throttle the throttle or slow down the truck

- Adjusts from “Off” to 100% broadcast support

TQi™ 2.4GHz high performance wireless system

- TQi™ 2-channel transmitter

- Automatically saves and loads settings for up to 30 Traxxas Link-enabled models

- Programmable multifunction button

- Adjustable steering and throttle share (dual rate)

- Adjustable steering and throttle sensitivity (exponential)

- Adjustable steering and throttle end points

- High frame rate of 13ms and almost no latency for responsive controls

- 5-channel micro receiver (#6533) with failsafe

- Patented waterproof receiver box with easy-access connector

suspension

- Heavy duty suspension arms

- Adjustable 4mm steel tip and camber links

- Oil-filled ultra shock absorbers

- Progressive springs with white powder coating

Velineon® 3500 kV brushless motor

- Ultra-high temperature sintered neodymium magnets

- Optimized for performance and efficiency in 1:10 scale vehicles

- Efficient high speed ball bearings

- Precision balanced rotor

- 3500kV

- Brilliant blue anodized finish

chassis

- Advanced modular composite tub design

- Secure the battery hold-down latch

- Side Nerf bars for impact resistance

steering

- Chassis mounted #2075 servo

- Double crank crank design with integrated servo saver

powertrain

- Permanent four-wheel drive with shaft drive

- Oil-filled steel gears front and rear

- Large steel spur gear with 32 pitches

- Central drive shaft made of anodized aluminum

Wheels and tires

- Licensed Ford ® replica option wheels

- 2″ outer diameter, 3″ inner diameter

- Licensed BFGoodrich® All-Terrain T/A® KO2 tires

- Larger diameter of 114mm

Sealed ball bearings

Hexagonal fittings with rust-resistant black oxide coating

Up to 60+ mph with 3s LiPo battery

Pro-scale design

Only Traxxas Pro Scale combines professional-level performance with the look and feel of a real Ford Raptor R. The Traxxas Raptor R features Ford -licensed bodywork and molded replica parts for maximum scale authenticity. Velineon® brushless horsepower and an extremely robust all-wheel drive system give the Raptor R not only its stunning looks but also performance characteristics.

Extremely robust upgrades

The Extreme Heavy Duty Upgrade Kit is pre-installed on the Raptor R to withstand the brutal rigors of powerful brushless systems. The Raptor R's driveshafts and suspension components are constructed from our most robust cold-weather material and are reinforced with additional material and oversized construction to form a virtually indestructible drivetrain.

Clipless body assembly

High-flying stunts and speed runs at more than 60 miles per hour in the desert will be no match for the Raptor R's sturdy clicky body. Locking tabs hold the case in place, but can be released in seconds to access the case. The Raptor R's hidden locking system maximizes convenience and realistic scale by eliminating traditional body clips that would interrupt the clean lines of the body.

Technical data:

Length: 24.98 inches (637 mm)

Front track: 11.63 inches (289 mm)

Rear track width: 11.63 inches (289 mm)

Ground clearance: 1.38 inches (35 mm)

2.05 inch (52 mm) (center)

Weight (without battery): 6.05 pounds (2.74 kg)

Height (overall): 8.91 inches (226 mm)

Wheelbase: 15.11 inches (384 mm)

Shock length (front): 3.45 inches (88 mm) - long

Shock Length (Rear): 3.98 inches (101 mm) - XX-long

Tire diameter: 4.5 x 1.9 inches (114mm x 48mm)

Wheel diameter: 2.2 inches (56 mm) (inner)

3.0 inch (76 mm) (external)

Speed ​​control: Velineon® VXL-3s (#3355R)

Motor (electric): 3500 kV Velineon® brushless

Overall drive ratio: 37/13 ring-pinion gear ratio

Differential Type: Hardened steel bevel gear, sealed, limited slip

Aisle pitch: 32

Chassis structure/material: composite tub

Drive system: four-wheel drive with shaft drive

Steering: Double rocker arm with integrated servo saver

Tires: Licensed BFGoodrich® All-Terrain T/A® KO2 2.2″ pre-glued with foam inserts

Tire diameter: 4.31 inches (114 mm) (front and rear)

Wheels (front/rear): Licensed 2.2″ Ford ® Factory option wheel

Wheel diameter: 2.2 inches (56 mm) outside

3.0 inches (76mm) internal

Radio system: 2-channel TQi™ 2.4 GHz transmitter with TSM® receiver

Servo: 2075 waterproof digital servo (125 ounces of torque)

Top Speed: 60+ MPH with optional included gear and 3s LiPo

Skill level: 1

Battery compartment (L/W/H): 165 mm (6.49″) x 50 mm (1.95″) x 23/26 mm (1.02″/0.90″)

Batteries required: 4 “AA” (transmitter), vehicle

Scope of delivery:

Raptor R with Velineon® VXL-3s controller and 3500 kV motor

Quick Start Guide

TQi™ 2.4 GHz radio system

High quality maintenance tools

Required accessories:

Traxxas driving battery 6 cells NiMH, 2S 7.4V or 3S 11.1V

Traxxas charger suitable for the driving battery

Four AA alkaline batteries for the transmitter.

World of Modells wishes you lots of fun 

Visit our Ebay Store

there you will find other series models at top prices

and thereby save on shipping costs