The riser kit is perfect for use with a number of our bar and valves and boasts features including easy clean shower diverter and auto lock shower head holder
Square Shower Kit Set Features:
Length of Rail Kit: 1000mm
Easy clean shower head nozzles
Auto Lock Sliding Shower Head Holder
Can be used with both bar valves and concealed valves and bath shower mixers
Adjustable wall fixing brackets (Ideal for replacing existing slide rail kit)
Length of shower hose: 1500mm High quality stainless steel
Length of small hose: 900mm High quality stainless steel
200mm Ultra Thin Stainless Steel Square Shower Overhead
Generous rainfall drenching showering experience
1/2" standard fitting - can be used with any standard shower arm
Ball joint tilts the shower head
Depth of riser kit: 380mm
Tube diameter: 22mm
Square Handset: High Pressure Boosting Low Bath Shower Head Water Saving Health Filter
Size:
Dimension of Tube (L x W): Approx. 945cm x 2.4cm/116.14’’ x 0.945’
Dimension of Square Sized Shower Head: Approx.20cm x 20cm/7.87’’ x 7.87’’
Dimension of Handheld Shower Head (L X H): Approx.8cm x 8cm/3.15’’ x 3.15’’
Length of Long Hose: Approx. 150cm/59.05’’
Length of Small Hose: Approx.90m/35.4’’
Working Requirements:
The Shower Rail Kit works on water systems that produce a minimum of 0.2 bar water pressure.
This can be achieved by using one of the following systems:
Combination boiler systems
Gravity fed systems (only with a pump)
Megaflow system
Pumped hot water systems
Standard pressurized hot water cylinder type systems
Package Included:
Two Shower Heads + Two Hose + Wall fixing Brackets + Valve + Installation Instruction
Note:
1. Recommend to be assembled by professional person.
2. Recommend 0.5 bar minimum for best performance.