0.8mm/1.0mm Nozzle H2000 Professional HVLP Air Paint Spray Gun Auto Car Detail Touch Up Sprayer Features: 1. It is very light to use, and the design is very ergonomic. 2. The stainless steel needle tip, made of stainless steel, has undergone special heat treatment, is durable, durable and smooth. 3. Superior Quality Spray Gun: Very light weight and very good atomization, comfortable hand feeling with smooth surface treatment. 4. With the stainless steel fluid needle and nozzle, this versatile spray gun can handle water-based paint and dilute solvent-based paint. 5. The in-built regulator ensures that you get the perfect flow of paint every time. This optimized flow rate means your operating costs will be reduced - no more wasted paint. 6. Gear position control valve, single gear position control valve, stable rotation, large flow, large air volume, large spray range, etc. It can be controlled at will during operation, and the design is user-friendly. 7. Wide Range of Applications: Widely used in photocatalytic coating, furniture painting car painting, art artistic drawing, wall painting, beauty nail painting, inkjet tattoo, arts crafts, model making, cake making, decorating spraying, clothing spray maps. Suitable for: It can be used for photocatalytic coating, Sofa furniture surface maintenance and repair, Wall painting car painting, art artistic drawing, Wall painting, beauty nail painting, inkjet tattoo, Arts crafts, model making, cake making, Decorating ceramic resin, various potions spraying, clothing spray maps Before purchasing, please check whether the product size is consistent with your needs. Specification: Condition: 100% Brand New Color: Blue Material: Aluminum + Copper + Stainless Steel + PVC Model: H2000 Feed Type: Gravity Feed Intake Screw: 1/4" Spray Bottle Capacity: 125ml Working pressure: 3bar Air consumption: 9cfm Spray Width: 160-250mm Best Spraying Distance: 200mm Nozzle Diameter: 0.8mm /1.0mm(Optional) Packing Included: 1 x Spray Gun 1 x Plastic Cup 1 x Cleaning Brush 1 x Filter 1 x Manual Instructions: 1. Pour the paint with good proportion into pot and connect with the feed joint. 2. Connect the compressed air to the air inlet connector. 3. Pull the trigger and adjust the proper working air pressure (3.5-4.5bar). 4. Adjust the amount of paint and spray width (adjust as needed). 5. Parallel and vertical spray on the cleaning surface (spray distance is about 20cm / 7.9in). Difference Between Upper and Lower Pots: 1. The lower pot S is suitable for spraying horizontally or less than 45 degrees up and down. 2. The upper pot G can be rotated, suitable for 360-degree spraying. 3. The lower pot have large capacity, and the upper pot have small capacity, chosen according to the usage scenario. Spray Gun Cleaning Method: At the end of each day's work, clean the spray gun with water. The cleaning method is as follows: let Tianna water(Nitrocellulose lacquer thinner)or spray gun water spray out from the gun body like oil spray. Repeat the operation. After cleaning, close the paint and dry it by hanging. Every other week, the needle nozzle and atomizing cap need to be removed, then soaked in Tianna water, cleaned, dried, applied with a little pneumatic oil, and then installed into the spray gun. Note that the nozzle interface is wrapped with white sealing tape to ensure the airtightness of the spray gun. If the viscosity of high spray paint, two or three days can be operated once. If the paint is properly maintained, it will increase its service life and maximize its value. Notes: 1. All dimensions are measured by hand, there may be small deviations. 2. With the use of spray gun long time, the nozzle will slowly wear, need to replace the needle nozzle accessories. 3. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
We are selling high quality aftermarket Motorcycle, Car, Bicycle, Sport & Industry Accessories et.. Any question pls feel free to contact us