|
|
|
|
|
|
Description:
Digital LCD display: with backlight and acousticgenerator. Sensitivity setting can be adjusted by level control.
Automatical dectection: automatically detects the LNBF frequency and works with any C-band, Ku-band or Ka-band satellite.
Plug and play: simple to use, no entry of the transponder frequency, symbol rate or polarity.
Function: convenient to use. Device for setting the optimal level of thereceived by a satellite dish.
Wide use: suitable for optimal alignment, adjustment of digital and analog satellite systems.
Instruction Steps:
Antenna, cable, star finder, set top box, TV connection operation:
1. Connect one side of the star finder labeled "Satellite" to the high frequency head of the antenna,
connect the other side labeled "Receiver" to the Receiver, and turn on the Receiver and TV.
2. After the receiver is turned on, the voltage supplied by the receiver is 13-18V.
Check that the screen of the star finder is on, and the light on means that the star finder is working normally.
3. Set the data of the star to be received (including local oscillator frequency, downlink frequency, code rate, polarization, etc.)
in the receiver and turn on thestrength andquality cursor state.
4. Counterclockwise adjust the knob on the side of the star finder to the maximum (otherwise thewill always be 0%).
5. Adjust the azimuth Angle andAngle of the antenna. When the LCD displays 99%, adjust the side knob to make the receivedattenuate part,
and then adjust the azimuth Angle,Angle and the polarization Angle of LNB for several times until theno longer increases.
6. Judge whether theis the required starby combining with the satellite receiver.
If yes, remove the star finder and reconnect the receiver to the LNB. If the receivedis not the desired star signal, repeat the above process.
Specifications:
Model: SF-95DR
Product name: satellitemeter
Type: digital satellite finder
Material: plastic
Color: as shown
Feature: LCD display
Measuring range: 950~2150
Measurement accuracy: -40~ -10dbm
Power supply voltage: 13~18V
Size(approx.): 13 x 6.5 x 2.7cm/5.12 x 2.56 x 1.06inch
Pacakge size(approx.): 16.5 x 10.5 x 5.5cm/6.50 x 4.13 x 2.17inch
Frequency range: 950-2150MHz
Input level range: -40～-10dBm
Impedance: 75Ω
Gain: ≥10 dB
Power supply: 13-18V DC
Operating temperature: 0～40℃
Package Includes:
1PC x Satellite Finder
1 PC x English Manual
Note:
1. The star finder cannot identify the starthat the user is looking for. Whenever there is a starinput, the star finder will show a signal.
At this time, only thequality cursor input from the star receiver to find the star parameter can be confirmed.
2. Ku band can be directly connected, c-band star-tuning requires a power spliter or about 100 meters of cable
between the star finder and the high frequency head to attenuate the signal, otherwise the star finder will self-excitation andto the LCD display of the number can not drop down.
3. In between tall buildings or strong interference zone to the star, the star finder will also whistle from the LCD display numbers.
Digital LCD display: with backlight and acousticgenerator. Sensitivity setting can be adjusted by level control.
Automatical dectection: automatically detects the LNBF frequency and works with any C-band, Ku-band or Ka-band satellite.
Plug and play: simple to use, no entry of the transponder frequency, symbol rate or polarity.
Function: convenient to use. Device for setting the optimal level of thereceived by a satellite dish.
Wide use: suitable for optimal alignment, adjustment of digital and analog satellite systems.
Instruction Steps:
Antenna, cable, star finder, set top box, TV connection operation:
1. Connect one side of the star finder labeled "Satellite" to the high frequency head of the antenna,
connect the other side labeled "Receiver" to the Receiver, and turn on the Receiver and TV.
2. After the receiver is turned on, the voltage supplied by the receiver is 13-18V.
Check that the screen of the star finder is on, and the light on means that the star finder is working normally.
3. Set the data of the star to be received (including local oscillator frequency, downlink frequency, code rate, polarization, etc.)
in the receiver and turn on thestrength andquality cursor state.
4. Counterclockwise adjust the knob on the side of the star finder to the maximum (otherwise thewill always be 0%).
5. Adjust the azimuth Angle andAngle of the antenna. When the LCD displays 99%, adjust the side knob to make the receivedattenuate part,
and then adjust the azimuth Angle,Angle and the polarization Angle of LNB for several times until theno longer increases.
6. Judge whether theis the required starby combining with the satellite receiver.
If yes, remove the star finder and reconnect the receiver to the LNB. If the receivedis not the desired star signal, repeat the above process.
Specifications:
Model: SF-95DR
Product name: satellitemeter
Type: digital satellite finder
Material: plastic
Color: as shown
Feature: LCD display
Measuring range: 950~2150
Measurement accuracy: -40~ -10dbm
Power supply voltage: 13~18V
Size(approx.): 13 x 6.5 x 2.7cm/5.12 x 2.56 x 1.06inch
Pacakge size(approx.): 16.5 x 10.5 x 5.5cm/6.50 x 4.13 x 2.17inch
Frequency range: 950-2150MHz
Input level range: -40～-10dBm
Impedance: 75Ω
Gain: ≥10 dB
Power supply: 13-18V DC
Operating temperature: 0～40℃
Package Includes:
1PC x Satellite Finder
1 PC x English Manual
Note:
1. The star finder cannot identify the starthat the user is looking for. Whenever there is a starinput, the star finder will show a signal.
At this time, only thequality cursor input from the star receiver to find the star parameter can be confirmed.
2. Ku band can be directly connected, c-band star-tuning requires a power spliter or about 100 meters of cable
between the star finder and the high frequency head to attenuate the signal, otherwise the star finder will self-excitation andto the LCD display of the number can not drop down.
3. In between tall buildings or strong interference zone to the star, the star finder will also whistle from the LCD display numbers.
- Payment must be received within 7 business days of auction closing.
- No combine postage discount
-
We will ship the package within 5 business days after the payment cleared.
-
We ship to Ebay address, and please make sure your ebay address correct before purchase.
-
Delivery time:
We thank you for your understanding on international shipping. We shipped the item quickly but the overseas shipping will be affected by many factors such as Customs processing, Post strike etc.
As the Customs clearance process is different in different countries,if such kind of goods need be collected tariff buyer needs to pay for the tariff. Anyway we will try our best to avoid this kind of thing.
- We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help
- Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.
- Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
We accept return within 30 days since you received your package. Please contact us for return or refund.
Our working time:
Monday- Saturday (Greenwich Time 2:30A.M-11:30A.M ) ( Pacific Time:6:30P.M-3:30A.M)
Please only use Ebay message to contact us (my ebay-won items-contact seller)
All messages will be answered within 1 business day. If
you do not receive our reply, please kindly re-sent your email and we will reply to you as soon as possible.