WHEEL CENTRE

CAP STICKER

 

Size: 60mm (approx)

100% brand new and good quality

Items Included in Purchase: 4 Pieces

 

 

This is not a centre cap but the emblem to stick onto the centre cap.

Check the diameter size of the item before placing an order.

 

 

Placing a wheel center cap sticker can be a straightforward process if you follow these steps:

1. Clean the Surface: Make sure the surface of the center cap is clean and dry. Use a mild detergent or rubbing alcohol to remove any dirt, grease, or residue. This ensures better adhesion for the sticker.

2. Positioning: Carefully position the sticker over the center of the wheel cap. You might want to use a ruler or measuring tape to ensure it's centered and aligned properly.

3. Peel Off the Backing: Once you're satisfied with the positioning, gently peel off the backing of the sticker. Be careful not to touch the adhesive side with your fingers to avoid leaving any oils or dirt.

4. Apply the Sticker: Slowly press down on the sticker starting from the center and working your way outwards to avoid trapping any air bubbles. Use a credit card or similar flat tool to smooth out the sticker and ensure it adheres well to the surface.

5. Final Touches: After applying the sticker, go over it again with a clean cloth or your fingers to ensure it's firmly attached and there are no air bubbles trapped underneath.

6. Allow it to Set: Let the sticker set for a few hours before driving to ensure it has fully adhered to the surface.

7. Maintenance: Avoid washing the wheels with abrasive cleaners or scrubbing brushes, as they can damage the sticker. Instead, use a gentle car wash soap and a soft cloth to clean around the sticker.

Following these steps should help you properly place a wheel center cap sticker with ease.