Description
This Capping Machine Is Made of High-quality Iron, Which Is less Prone to Damage and Guarantees a Long Service Life. Its Small Size and Light Weight Make It Easy to Carry. It Is Ideal for Semi-automatic Lines As It Can Be Used for Efficient and Labor-saving Capping Work.
Key Features
High Efficiency: According to Your Proficiency, You Can Screw 20 to 50 Caps per Minute, Which Is Very Efficient and Time-saving, and Suitable for Semi-automatic Assembly Lines.
Sturdy and Durable: the Capping Machine Is Made of High-quality Iron with an Electroplated Surface, Which Is Durable, Wear-resistant, and Rust-proof, Ensuring a Long Service Life.
Low Noise: the Motor Parameters Are Reasonably Selected, so It Runs Smoothly, and the Noise When Used Is Low. This Can Bring You a Quiet Environment.
Easy to Operate: You Simply Press the Switch on the Capping Machine to Start Working. Once the Cap Has Been Tightened, the Machine Stops Working When the Hand Is Released, so You Can Easily Master the Operation Process.
Comfortable to Use: the Capping Machine Is Ergonomically Designed for a Comfortable Grip Which Allows Long Working Hours Without Strain.
Forward and Reverse Spin Design: the Machine Is Equipped with a Knob to Adjust the Direction of Spin, Which Can Be Used to Both Tighten and Unscrew Bottle Caps, Making It Very Practical and Convenient.
Labor Saving: with Its Powerful Torque, It Allows You to Easily Tighten and Loosen Bottle Caps with less Effort than the Traditional Hand-screwing Method.
Guaranteed After-sales Service: We Aim to Provide Quality Products and Services. If You Have Any Problems, Please Feel Free to Contact Us, We Will Reply and Solve the Problem for You As Soon As Possible.
Details
Spring Balancer: It Is Equipped with an Iron Spring Balancer with a High Load-bearing Capacity and Good Stability. It Is Used to Hang a Capping Machine for Easy Access and Use and Saves some Space in Your Workshop.
Silicone Rings: This Handle Capping Machine Is Equipped with 4 Different Sizes of Silicone Rings, Which Enable Flexible Tightening of Different Cap Sizes to Suit Your Needs. Its Soft Rubber Material Effectively Prevents Damage to the Cap.
Application
It Is Suitable for the Round Cap with a Diameter of 10-50mm/0.39-1.96inch.
Specification
Material: Aluminum, Iron, Silicone
Power Voltage: Air Compressor to Provide
Working Method: Pneumatic Capping
Idle Speed: 9000r/Min
Air Pressure: 6kg/M2
Suitable Pressure: ≥0.6mpa
Fit Botter Height: All
Cap Diameter: 10-50mm/0.39-1.96in
Capping Speed: 20-50pcs/Min
Applied Bottle Height: Unlimited
Torque: 5-45kgf/Cm
Weight: 2kg/4.4lbs
Packing Size: 31*15*14cm/12.2*5.91*5.51in
How to Install
1. Unscrew the Upper Cover.
2. Install the Silicone Rubber Ring.
3. Tighten the Upper Cover.
4. Insert the Head of an Electric Screwdriver into the Cover Hole.
5. Tighten the Screws to Secure the Cover.
6. Installation Is Complete.
Package Included
1* Handle Capping Machine
4* Silicone Rings
2* Aluminum Capping Heads
1* Spring Balancer
All Accessories for Use
Notes
1.Before Using the Machine, Please Select a Suitable Capping Head, Then Adjust the Tolerance and Torque Adjuster of the Capping Head Position to Meet the Capping Strength. Finally Check All the Screws of the Machine to Ensure That They Are Not Loose and Tighten Them with a Tool If Loose.
2. Keep Other Products Away from the Machine, to Avoid Stopping the Machine Move.
3. After Use, Please Turn off the Power to Avoid Other Trouble.
4. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.
shipping notice | Can't not ship to Puerto Rico,Alaska/Hawaii |
---|---|
Brand | Unbranded/Generic |
MPN | Does Not Apply |
Fit Botter Height | ALL |
Suitable Pressure | ≥0.6MPA |
Air Pressure | 6kg/m2 |
Idle Speed | 9000R/Min |
Twisting Force | 5-45Kgf.cm |
Working Method | Pneumatic Capping |
Capping Diameter | 10 - 50 mm |
UPC | Does not apply |