Good News: New items have arrived Germany warehouse, welcome you to purchase.
We have Germany Warehouse in Germany,so we can ship from Germany to European Union Customers.
We ship via DHL GLS to European Countries.
Package include:
The machine for a full set of spare parts, shall be installed by the
buyers,the package include the U Disk , with detailed user manual and
free software,buyers don‘t need to worry about machineAssembly.
Introduction:
Body used profiles and plastic, small size, light weight, USB interface,
GRBL control system, with Emergency stop and limit switch learning,
entry preferred. Can use carving knife, but also can use laser
engraving.
Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the other similar material.
Specification:
Introduction:
Body used profiles and plastic, small size, light weight, USB interface,
GRBL control system, with Emergency stop and limit switch learning,
entry preferred. Can use carving knife, but also can use laser
engraving.
Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the other similar material.
Specification:
Working area : 30x18x4.5cm
Frame size : 42x25x27CM
Spindle : 775 spindle motor (12-24V) 10000r/min
Spindle Collet : ER11-3.175mm,Support 0-7mm
Step motor : Nema17 Stepper,Torque 0.25N/M, 1.3A
Power supply : AC110-240V
Software : GRBL controller
Support System: Windows XP / Win 7 / Win 8 /
Drill bits: tip 0.1mm, 20 degree , diameter 3.175mm.
Laser: 1000mw 405nm,12v / 2500mw 450nm,12v / 5500mw 450nm,12v.
Machining accuracy: about 0.2mm
Mchining instructions：1) NC：G-code, TAB, NC, NCC files
2) laser: G-code, JPG, DXF file
Features:
I.The new GRBL1.1F control board
1.GRBL1.1F firmware, stable performance
2.Offline engraving (optional offline module),offline tool setting,engraving.
3.The laser supports PWM/TTL signal control, the power is adjustable from 0-100%.
4.Spindle supports PWM power 0-100% adjustable.
5.Stepper motor overcurrent protection to avoid damage,upgrate intergrated stepper motor driver,2A high current,high stability.
6.Thelaserdirectlyentersthepictureengraving,noprogramming,nodesign,simpleandconvenient.
7.Professional shell protection,the fan actively dissipates heat,and does not heat up for a long time.
II.The engraving machine adds an emergency stop button & 3 limit switches.
Features:
I.The new GRBL1.1F control board
1.GRBL1.1F firmware, stable performance
2.Offline engraving (optional offline module),offline tool setting,engraving.
3.The laser supports PWM/TTL signal control, the power is adjustable from 0-100%.
4.Spindle supports PWM power 0-100% adjustable.
5.Stepper motor overcurrent protection to avoid damage,upgrate intergrated stepper motor driver,2A high current,high stability.
6.Thelaserdirectlyentersthepictureengraving,noprogramming,nodesign,simpleandconvenient.
7.Professional shell protection,the fan actively dissipates heat,and does not heat up for a long time.
II.The engraving machine adds an emergency stop button & 3 limit switches.
Features:
I.The new GRBL1.1F control board
1.GRBL1.1F firmware, stable performance
2.Offline engraving (optional offline module),offline tool setting,engraving.
3.The laser supports PWM/TTL signal control, the power is adjustable from 0-100%.
4.Spindle supports PWM power 0-100% adjustable.
5.Stepper motor overcurrent protection to avoid damage,upgrate intergrated stepper motor driver,2A high current,high stability.
6.Thelaserdirectlyentersthepictureengraving,noprogramming,nodesign,simpleandconvenient.
7.Professional shell protection,the fan actively dissipates heat,and does not heat up for a long time.
II.The engraving machine adds an emergency stop button & 3 limit switches.
The machine for a full set of spare parts, shall be installed by the
buyers,the package include the U Disk , with detailed user manual and
free software,buyers don‘t need to worry about machineAssembly.
F.A.Q: 1 Q: Does this machine need to be assembled when I received it?
A: This machine comes as a kit. You need to assemble it yourself. All tools and part are included
in the kit.
2 Q: How to assemble the kit?
A:We'll provide whole assemble and operating manual,please share your email address,then we'll send to you.
3 Q: Are there software and instructions can I get it?
A:You can get the software in a USB disk with machine.
4 Q: And what image format the software supports? Engrave Mode?
A: Supported Image Format: jpg, bmp, svg, G-code
Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving
5 Q: Whick type computer system can run its software?
A:The software only support the Windows XP/7/8/10.
6 Q: What's the laser's lifetime?
A: The laser module have over 6,000 hours lifetime.
7 Q: What material can it engrave?
A:Wood, bamboo, plastic, paper, leather, rubber,MDF.
8 Q:What material can it cut?
A:wood, paper, thin leather.
9 Q:Can I use it to cut or engrave on metal?
A:It can not engrave or cut on any metal.
10 Q: Can I regulate the laser power or the laser power is adjustable?
A: Sorry that the Fixed laser power is not adjustable, but the engraving speed is adjustable.
11 Q: How long can the machine work continuously?
A: It can work continuously about 45 minutes, after the laser mould cool
down(about half of an hour), then start work again. Long time work
continuously with shorten the laser module lifetime.
12 Q:My laser doesn't work, what should I do?
If the machine does not work, it might because:
A The wire connection is wrong.Please check the connection like the picture shown.
B Your computer could not support the software.Please use Win XP 7/8/10 to check it.
C Software problem .Please check whether wires are inserted rightly. And then check your data setting.
D The kit misses some accessories. Please compare with the instruction and tell us, we will solve it once you send us the email.
E Laser module/ driver board/power supply is broken.
Please check which part is the main problem, and then send us a video to prove it.
Or you can send us a video about your software setting, working laser and driver board. We will analyze it and give you a solution.
Friendly Note:Due to the different wattage of the laser head, the engraving material
range, engraving speed, depth, etc. are different. The greater the
power, the faster the speed
3W-5.5W laser:
1. Can carve wood, paper, plastic, leather, bamboo, bones, teeth, etc.
2. Can't carve metal
7W-10W laser:
1.Can carve Wood, paper, plastic, leather, bamboo, bones, teeth, acrylic and other materials that can be burned by fire.
2. Can carve 304 201 pure color stainless steel, painted metal (except
stainless steel, other pure metal with primary color smooth surface
cannot be carved)
1 Q: Does this machine need to be assembled when I received it?
A: This machine comes as a kit. You need to assemble it yourself. All tools and part are included
in the kit.
2 Q: How to assemble the kit?
A:We'll provide whole assemble and operating manual,please share your email address,then we'll send to you.
3 Q: Are there software and instructions can I get it?
A:You can get the software in a USB disk with machine.
4 Q: And what image format the software supports? Engrave Mode?
A: Supported Image Format: jpg, bmp, svg, G-code
Supported Engrave Mode: Photo, Word, Scan, Outline, Pixel Laser Engraving
5 Q: Whick type computer system can run its software?
A:The software only support the Windows XP/7/8/10.
6 Q: What's the laser's lifetime?
A: The laser module have over 6,000 hours lifetime.
7 Q: What material can it engrave?
A:Wood, bamboo, plastic, paper, leather, rubber,MDF.
8 Q:What material can it cut?
A:wood, paper, thin leather.
9 Q:Can I use it to cut or engrave on metal?
A:It can not engrave or cut on any metal.
10 Q: Can I regulate the laser power or the laser power is adjustable?
A: Sorry that the Fixed laser power is not adjustable, but the engraving speed is adjustable.
11 Q: How long can the machine work continuously?
A: It can work continuously about 45 minutes, after the laser mould cool
down(about half of an hour), then start work again. Long time work
continuously with shorten the laser module lifetime.
12 Q:My laser doesn't work, what should I do?
If the machine does not work, it might because:
A The wire connection is wrong.Please check the connection like the picture shown.
B Your computer could not support the software.Please use Win XP 7/8/10 to check it.
C Software problem .Please check whether wires are inserted rightly. And then check your data setting.
D The kit misses some accessories. Please compare with the instruction and tell us, we will solve it once you send us the email.
E Laser module/ driver board/power supply is broken.
Please check which part is the main problem, and then send us a video to prove it.
Or you can send us a video about your software setting, working laser and driver board. We will analyze it and give you a solution.
Due to the different wattage of the laser head, the engraving material
range, engraving speed, depth, etc. are different. The greater the
power, the faster the speed
3W-5.5W laser:
1. Can carve wood, paper, plastic, leather, bamboo, bones, teeth, etc.
2. Can't carve metal
7W-10W laser:
1.Can carve Wood, paper, plastic, leather, bamboo, bones, teeth, acrylic and other materials that can be burned by fire.
2. Can carve 304 201 pure color stainless steel, painted metal (except
stainless steel, other pure metal with primary color smooth surface
cannot be carved)
Shipping
1- Items Ship from Jenec,CZ only to eBay ADDRESS. Package handling only takes 1 business day at our EU warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by phone or leave a ebay note if the changes are needed before we send the product. If you have any changes, pls inform us 7:00am-13:00pm (Berlin Time) in the same day.
2- If an change of address is needed, you will be responsible for any fees associated in the condition that you contact us after we ship your item.
3- International Buyers – Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. 4- Orders placed on weekend will be shipped within 2 days.
5- We have warehouse in EU, Ukraine, RU, USA, so that we can ship to the EU, Ukraine, RU, USA clients very fast via DE-DHL, IML, UPS.
- 1
- Items Ship from Jenec,CZ only to eBay ADDRESS. Package handling only takes 1 business day at our EU warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by phone or leave a ebay note if the changes are needed before we send the product. If you have any changes, pls inform us 7:00am-13:00pm (Berlin Time) in the same day. 2
- If an change of address is needed, you will be responsible for any fees associated in the condition that you contact us after we ship your item. 3
- International Buyers – Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. 4 - Orders placed on weekend will be shipped within 2 days. 5
- We have warehouse in EU, Ukraine, RU, USA, so that we can ship to the EU, Ukraine, RU, USA clients very fast via DE-DHL, IML, UPS.
Return
1- All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
2- Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
3- We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
4- We reserve the rights to refuse any returns for objective reasons.
Payment
- We accept Paypal payment only.
- Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
- We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.