ELRS 2.4Ghz 5CH PWM ExpressLRS Receiver with 2DBi 2.4G Copper Pipe Antenna1635

Support one channel maximum 34V voltage return (requires firmware version 3.0.0 and above)
Receiver output protocol:PWM or CRSF
Power consumption:45mA@5V (connection status), 85mA@5V (WIFI upgrade status)

Item:ELRS 2.4G 5CH PWM Receiver
Model:-2.4G-5CH
Frequency:2.4Ghz
Chip:SX1281+ESP8285
Telemetry power:12dbm
RF Connector:IPEX 1
Input voltage:4-10V
PWM channel:5 channels
Weight:4.7g(receiver plus antenna)
Firmware:DIY 2.4 GHz/DIY 2400 RX PWMP
PWM output settings
The ELRS PWM receiver can enter the configuration interface through WIFI, and set parameters such as PWM channel, refresh frequency, and runaway protection. Specific steps are as follows:
The receiver is powered on and waits for 60S, the receiver light flashes quickly, connect to the WIFI hotspot (ExpressLRS RX) password expresslrs, and automatically enter the setting interface.
ELRS official website introduction https://.expresslrs./3.0/hardware/pwm-receivers/
Colour:Black
Material:PCB+Plastic+Metal
Size:PCB size:15.5mmx25.5mm

Package Contents:
1 x ELRS 2.4G 5CH PWM Receiver
1 x 2.0dbi 2.4g copper pipe to antenna

• 
• 
• 
• 
• 
• 
• 
•