![](https://s3-eu-west-1.amazonaws.com/images.linnlive.com/80bacb23157e1baa243c6d2550fe5ca6/7a78c323-e86d-4c8d-9882-8145ac2b9942.jpg)
9.Solutions Python Clamp With Stud 5/8-inch Pin
There is more to the Python Clamp than meets the eye. It can be adapted for use with many different accessories used in photo, video, stage, and visual merchandising. Some examples of use are:
Photo and Video: It can be used in a combination with a grip head, where by replacing the grip head’s two discs and replacing with the Python Clamp, the grip head is then able to clamp onto odd shaped objects and tubes up to 50mm.
Stage: It can be used in combination with a truss coupler to attach truss structures to regular building materials such as wood boards. It can also be used together with an adapter to hang lighting fixtures on a greater range of different mounting shapes.
Visual Merchandising: It can be used in combination with any 10mm rods to form shelves, hangers, or holders of any kind.
Python Clamp Mini
The Python Clamp Mini combines a clamp with a revolving 3/8” and 5/8” Pass-thru receptacle. Both the clamp and pass-thru receptacle tighten via one T-knob, allowing for remarkable ease of use. The clamp can be positioned anywhere along a 3/8” or 5/8” rod, and it can swivel around the rod on its own axis to accommodate any position.
When used together with a rod and a Quick Mount Receiver to 3/8” Rod, the clamp is a great tool for mounting an action camera in any thinkable position.
Python Clamp with 3/8”Male Thread
The Python Clamp with 3/8” Male Thread has a 3/8”-16 threaded screw for mounting female threaded equipment like quick release plates, tripod heads, cheeseplates, and other 3/8” female threaded gear. The 3/8”-16 threaded screw is fixed and is independent from the tightening mechanism of the clamp.
Python Clamp with 5/8" Pin
The Python Clamp with 5/8” Pin has a 5/8” pin for mounting baby-standard grip and lighting equipment.
Python Clamp with Grip Joint
The Python Clamp with Grip Joint is fitted with a unique grip head that fastens onto rods ranging in diameter from 1/4” to 5/8”. The clamp can be used like a traditional grip head on a stand but with the added functionality that the Python Clamp provides.
The Python Double Clampython Double Clamp has two Python Clamps connected on one 3/8” rod. Both clamps can rotate 360 degrees independent of one another.
Python Clamp with Snap-in Socket
The Python Clamp with Snap-in Socket can be used with s 5/8” stud or spigot for quick, snap-in mounting capabilities. The socket snap-locks when a spigot or stud is inserted which means equipment can be placed/hung with one hand. The socket has an additional finger screw for securing the stud and to stop it from turning.
All Python Clamps can have their center bolts removed, allowing use with any 3/8”-16 (10mm) threaded equipment.