Features:

*Thermocouples are very sensitive and require good  with cold compensated references.

 The MAX31855, which is an SPI interface thermocouple 

*It is a "1-Wire" thermocouple  that can have any number of splits on a single shared I/O line.

*The MAX31850K does all the work for you and easily interfaces with any 1-Wire enabled microcontroller.

*The breakout board features the chip itself, a 3.3V regulator with a 10uF bypass capacitor, and is fully assembled and tested. 

The board can be used with either "parasitic power" (power on the data lines) or "local power" (converter power from the Vin pin).

*Please note: the board does not have level shifting on the 3V data line - we did this on purpose so that it could be used in parasitic mode. 

The data line must be level shifted to 3V - our 4-channel converter is perfect for 1-Wire level shifting, and you only need to use on the "1-Wire host" for all the thermocouples on the shared data line.

*The MAX31850K data format is very that of the well known 1-Wire  temperature sensors, but there is no loss of compatibility.

 if you don't change the  to check for the new "1 Wire family" types. Compatibility. 

We have adapted the classic  Wire and DallasTemp libraries to be compatible with the MAX31850, so please click on these links for our libraries.

*Applicable to any K-type thermocouple, not to any other type of thermocouple other than K-type


Specifications:

Part Name:Temperature Sensor Board

Material:N

Size:20mm x 20mm

Color:As picture shows


Package Content:

1* Board


Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.



We accept payment via Paypal only.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.


 

We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.

 

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

 

It takes about 7-15 working days to UK; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

 



 

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.



DataCaciques