Features:
The FGr4P uses AFHDS 3(Third Automatic Frequency Hopping Digital System).
It uses a with two-way transmission capabilities and is designed to be compact and easy to install. It can output standard PWM, i-BUS, and PPM.
Suitable for AFHDS3 system remote controller.
Ultra-small size and ultra-lightweight, effectively save space and reduce item's weight-bearing.
Any problem, please our store without hesitation. to serve you.
Specification:
Product Model: FGr4P
PWM Channel: 4
Frequency:
protocol: AFHDS 3
:> 200m (ground)
type: (150mm)
: 3.5-8.4V
RSSI: Supported
Data port: PWM / PPM / i.bus / s.bus
: -10 ℃ — + 60 ℃
Humidity : 20% -95%
Online Update: Yes
Size: 29 * 22 * 16.2mm
Weight: 8g
1- 4: Connects the servos, , or other
i-BUS: for channel expansion or connect sensors
BIND: For bind cable
: Connect the
Binding:
1. Insert the binding cable into the receivers bind port
2. the cable into any other port, and the receivers will to flash quickly indicating that it has entered bind mode
3. Put the into bind mode; (See the transmitters instruction manual for more information)
4. Binding is successful when the receivers will stop flashing
Remove the and bind cables from the receiver.
5. Reconnect the cable to the receiver
6. Check to make sure that the and receiver are working as expected, if there are any issues or unexpected operation follow the above to bind again.
Package information:
Package size: 8 * 5 * 3cm
Package Weight: 10g
Polybag package
Package list: 1*FGr4P receiver; 1*Binding cable
The FGr4P uses AFHDS 3(Third Automatic Frequency Hopping Digital System).
It uses a with two-way transmission capabilities and is designed to be compact and easy to install. It can output standard PWM, i-BUS, and PPM.
Suitable for AFHDS3 system remote controller.
Ultra-small size and ultra-lightweight, effectively save space and reduce item's weight-bearing.
Any problem, please our store without hesitation. to serve you.
Specification:
Product Model: FGr4P
PWM Channel: 4
Frequency:
protocol: AFHDS 3
:> 200m (ground)
type: (150mm)
: 3.5-8.4V
RSSI: Supported
Data port: PWM / PPM / i.bus / s.bus
: -10 ℃ — + 60 ℃
Humidity : 20% -95%
Online Update: Yes
Size: 29 * 22 * 16.2mm
Weight: 8g
1- 4: Connects the servos, , or other
i-BUS: for channel expansion or connect sensors
BIND: For bind cable
: Connect the
Binding:
1. Insert the binding cable into the receivers bind port
2. the cable into any other port, and the receivers will to flash quickly indicating that it has entered bind mode
3. Put the into bind mode; (See the transmitters instruction manual for more information)
4. Binding is successful when the receivers will stop flashing
Remove the and bind cables from the receiver.
5. Reconnect the cable to the receiver
6. Check to make sure that the and receiver are working as expected, if there are any issues or unexpected operation follow the above to bind again.
Package information:
Package size: 8 * 5 * 3cm
Package Weight: 10g
Polybag package
Package list: 1*FGr4P receiver; 1*Binding cable