Features:
๐ Wide Compatibility: With an ingenious and highly compatible structural connection device, S30PRO module can be well adapted to different engraving machines, cutting machines, DIY 3D printers, milling machines, etc. Compatible with SCULPFUN S9//, ATOMSTACK /A5Pro, ( version) engraving machine.
๐ Ultra-fine and high-density 10W shaping technology: The of S30 is increased to 10W, which is twice that of S9. But getting the same 0.08mm ultra-fine beam as the S9 means that the S30 has higher energy density, cutting penetration and engraving capabilities.
๐ Powerful High- Assist: S30 is equipped with an high-pressure -assisted metal nozzle, which can generate high-pressure airflow under the pump, greatly improving the cutting efficiency, and the cutting is more than 5 times faster than that without assistance.
๐ Detachable eye : Equipped with a detachable eye , which will not even without glasses. Also, if you don't need it, you can easily disassemble it.
๐ &Cleaner: Combining high- assist and 10W high-energy density , high-density woods such as can be cut; And the cutting surface is cleaner with powerful airflow blows away the residue, free of any .
๐ Universal /PWM modulation board: It uses a common /PWM modulation board, which can be adapted to common GRBL or motherboards. See product pictures for details.
Specification:
Module: SCULPFUN S30 module Set
For: engraving machines such as SCULPFUN S9//ใATOMSTACK /A5Proใ( Version), ELEKSMAKER, or DIY 3D printers, machine tools.
Engraving Materials: all kinds of wood (including walnut, cherry and other high-density wood), MDF, , cardboard, , leather, board, oxide, 304 stainless steel, ceramic, dark stone
Cutting Materials: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some boards, boards
Output : 10W ( energy)
Inner diameter of : 7.5mm (recommended to use 30L/min, 0.03Mpa compressor, out diameter of nozzle:8mm)
Wavelength: 455ยฑ5nm
Type and Fixed : fixed , fixed through 50mm measuring column
Material: alloy
circuit board
Circuit Board Size: 40*40mm
Circuit Board:/PWM modulation board
Input voltage:
Max Input of module: 5A
Wire Rod:HY2.0, 3Pin terminal (3-core cable, A: PWM +, B: GND, C: VCC ).
Fan: 0.15A 4020 fan
Fan : 15000 rpm
Operating : -20 โ to 70 โ
Package Weight: 0.6kg/21.1oz
Package Size: 305x150x125mm/12x5.9x4.9in
Note:
How to judge whether the S30 is suitable for use? You need to pay attention that the input voltage of the S30 is , and the S30 is a 3pin interface, you can check the detailed pictures.
โ Because of the powerful of S30 , it is forbidden to run the engraving machine unattended. Pause it if you're not around.
โ For detailed machine instructions, please refer to the manual for parameter settings.
โ When operating the engraving machine, please install the protective cover; if it is not installed, you need to wear .
โ Do not the with your hands, otherwise you may burn your hands.
โ Please strong impact on the machine.
โ It is forbidden for children under 14 years old to use this product, and over 14 years old need attended.
โ Do not use the directly on any specular reflection object, which may cause injury to the operator or burn the .
Packing List:
1 x 7.5mm inner diameter tube
1 x acrylic protective cover
1 x S30 head
1 x Multi-function connector
1 x 50mm measuring column
1 x Screw and tool kit
๐ Wide Compatibility: With an ingenious and highly compatible structural connection device, S30PRO module can be well adapted to different engraving machines, cutting machines, DIY 3D printers, milling machines, etc. Compatible with SCULPFUN S9//, ATOMSTACK /A5Pro, ( version) engraving machine.
๐ Ultra-fine and high-density 10W shaping technology: The of S30 is increased to 10W, which is twice that of S9. But getting the same 0.08mm ultra-fine beam as the S9 means that the S30 has higher energy density, cutting penetration and engraving capabilities.
๐ Powerful High- Assist: S30 is equipped with an high-pressure -assisted metal nozzle, which can generate high-pressure airflow under the pump, greatly improving the cutting efficiency, and the cutting is more than 5 times faster than that without assistance.
๐ Detachable eye : Equipped with a detachable eye , which will not even without glasses. Also, if you don't need it, you can easily disassemble it.
๐ &Cleaner: Combining high- assist and 10W high-energy density , high-density woods such as can be cut; And the cutting surface is cleaner with powerful airflow blows away the residue, free of any .
๐ Universal /PWM modulation board: It uses a common /PWM modulation board, which can be adapted to common GRBL or motherboards. See product pictures for details.
Specification:
Module: SCULPFUN S30 module Set
For: engraving machines such as SCULPFUN S9//ใATOMSTACK /A5Proใ( Version), ELEKSMAKER, or DIY 3D printers, machine tools.
Engraving Materials: all kinds of wood (including walnut, cherry and other high-density wood), MDF, , cardboard, , leather, board, oxide, 304 stainless steel, ceramic, dark stone
Cutting Materials: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some boards, boards
Output : 10W ( energy)
Inner diameter of : 7.5mm (recommended to use 30L/min, 0.03Mpa compressor, out diameter of nozzle:8mm)
Wavelength: 455ยฑ5nm
Type and Fixed : fixed , fixed through 50mm measuring column
Material: alloy
circuit board
Circuit Board Size: 40*40mm
Circuit Board:/PWM modulation board
Input voltage:
Max Input of module: 5A
Wire Rod:HY2.0, 3Pin terminal (3-core cable, A: PWM +, B: GND, C: VCC ).
Fan: 0.15A 4020 fan
Fan : 15000 rpm
Operating : -20 โ to 70 โ
Package Weight: 0.6kg/21.1oz
Package Size: 305x150x125mm/12x5.9x4.9in
Note:
How to judge whether the S30 is suitable for use? You need to pay attention that the input voltage of the S30 is , and the S30 is a 3pin interface, you can check the detailed pictures.
โ Because of the powerful of S30 , it is forbidden to run the engraving machine unattended. Pause it if you're not around.
โ For detailed machine instructions, please refer to the manual for parameter settings.
โ When operating the engraving machine, please install the protective cover; if it is not installed, you need to wear .
โ Do not the with your hands, otherwise you may burn your hands.
โ Please strong impact on the machine.
โ It is forbidden for children under 14 years old to use this product, and over 14 years old need attended.
โ Do not use the directly on any specular reflection object, which may cause injury to the operator or burn the .
Packing List:
1 x 7.5mm inner diameter tube
1 x acrylic protective cover
1 x S30 head
1 x Multi-function connector
1 x 50mm measuring column
1 x Screw and tool kit