[Product Information]: Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout.Model:3S-4S Suitable : Lithium Iron Phosphate, NCM Ternary Polymer,(Not Fit Lithium Titanate) ,Voltage is 1.8 V-4.5V ,the quiescent current is about 12 mA, and it is recommended that the battery capacity is between 60-300 AH.

[Capacitance Principle]: No external power supply is required,The working principle is Capacitor fit transfers the charge transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.

[Protection switch]: With under-voltage sleep protection, the voltage will automatically stop entering the sleep state when the voltage is lower than 3.0V, and the standby power consumption is less than 0.1 mA.

[Original Design]:using the original ultra-low internal resistance MOS, 2OZ copper thickness PCB, equalizing current 0-5.5A, The more balanced the battery, the lower the current.

Colour: black

Material: PCB

Model:3S-4S

Suitable : Lithium Iron Phosphate, NCM Ternary Polymer,(Not Fit Lithium Titanate)

Voltage is 1.8 V-4.5V

Quiescent Current: 12mA Suggest

Battery Capacity: 60-300AH

Working Temperature :-20 degrees to +60 degrees

Sleep Protection:voltage<3V, enter the sleep,standby power consumption is less than 0.1mA,to reduce the damage to the battery.

Safety Information：Before connecting the equalization board, check whether each piece of wiring is correct, and do insulation work to prevent burnout,This is very important, please pay attention.

NOTE: If the LED indicator is always on, it means that the capacitor plate has been running in a balanced manner. When a fault occurs, the LED indicator will go out.

Package Contents:

1 * Equalizer Energy Transfer Board (4 strings)

Only the above package content, other products are not included.

Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.