2 Pieces Clock Movement Mechanism Clock Hands Quartz High Torque (1piece Long Shaft + 1 piece Short Shaft) Clock Movement Replacement with 5 Pairs of Hands Clock Repair Parts Replacement Clock Movement Kits 

About This Item:
🌷Diy Clock Repair Kit: you will get 2 pieces of high torque clock movements with 5 different pairs of hands(1piece Long Shaft + 1 piece Short Shaft), these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself
🌷Size: Long Sweep second movement is suitable for 9-13 mm/ 0.35 - 0.51 inches thickness of clock panel, the total shaft length is approx. 20 mm/ 0.79 inches, and the thread length is approx. 13 mm/ 0.51 inches; Short Sweep second movement is suitable for 4-6 mm/ 0.16 - 0.24inches thickness of clock panel, the total shaft length is approx. 15 mm/ 0.51 inches, and the thread length is approx. 6 mm/ 0.24 inches. 
🌷Accurate Time Keeping and Quiet Motor: the clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment
🌷Wide Application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts
🌷5 Different Styles of Hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect

Warm Notice: There are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent

                      Please refer to the pointer installation diagram for the pointer installation method. After three pins are installed, the three pins should be parallel when viewed from the side, and the pointers cannot touch each other.

Features:
1. Keep Your Memory: If you don't want to throw away the broken clock that has accompanied you for a long time, this clock replacement kit is helpful to repair the clock at home, so it let you remain the memories that antique clock gave you.

2. Accurate Travel Time, daily error of 1 second, low power consumption, ordinary battery can be used for 6 months;

3. Scope of Product Application: craft clocks, wooden wall clocks, metal wall clocks, electric box wall clocks, porcelain crystal paintings, repair and replacement, DIY home decoration clocks, decorative and beautifying walls, etc.;

Specifications:
Material: plastic, brass, aluminum
Colors: black, gold

Size:
Shaft Diameter: 0.3 inch
2pcs Host:  1piece Long Shaft + 1 piece Short Shaft 
Threaded shaft length: Long 13mm/0.51in;Short 6mm/0.24in
Long Host Suitable for : 9~13mm (0.35~0.51in) thickness clock panel
Short Host Suitable for: 4~6 mm(0.16~0.24in) thickness clock panel
Overall shaft length: Long 20mm/0.79in; Short 15mm/0.59in
Style 1: Hour/ Minute/ Second Hand Length (from the center of the hole to the end): approx. 2.68 inch/ 3.62 inch/ 4.92 inch
Style 2: Hour/ Minute/ Second Hand Length (from the center of the hole to the end): approx. 2.83 inch/ 3.86 inch/ 4.92 inch
Style 3: Hour/ Minute/ Second Hand Length (from the center of the hole to the end): approx. 2.87 inch/ 4.33 inch/ 4.92 inch
Style 4: Hour/ Minute/ Second Hand Length (from the center of the hole to the end): approx. 4.53 inch/ 5.71 inch/ 6.10 inch
Style 5: Hour/ Minute Hand Length (from the center of the hole to the end): approx. 3.74 inch/ 4.92 inch 
Case size: approx. 2.2 x 2.2 x 0.6 inch (L x W x H)
Second Hand Motion: sweeping
Battery: 1 x 1.5 V AA carbon battery (not included)

Package Includes:
2 x Quartz clock movements (1piece Long Shaft Movement + 1 piece Short Shaft Movement ) 
5 x Hour hands
5 x Minute hands
4 x Second hands 
2 x Rubber gaskets
2 x Brass washers
2 x Brass hex nuts
2 x Metal hooks
1 x Second Cap Nut

Notes: 
1.Be careful not to bend the hands with too much pressure.
2. Please do not use alkaline battery, rechargeable battery, or they will damage the movement.
3. Do not tighten the brass hex nut too tight.
4. Press hard to get all clock hands in place.
5. Check if all hands are aligned.
6. Please allow slight dimension error and slight color difference.