psvsd v2.1 clone from a Chinese supplier. These adapters have "card detect fix" from psvsd v2.1.1 manually soldered in by me. All units have been tested by me and work, however due to the nature of the item, they are being sold AS-IS. 

I am not responsible for any damages that may occur during installation, however if you believe you have received a faulty unit, please contact me and we may be able to work something out. I am merely an honest seller protecting myself from potential dishonest buyers. Please only buy if you are, or have a friend who is, competent with game console repair OR if you are willing to take responsibility for the install process.

My testing process was as follows:
1) Solder in the "card detect fix"
2) Clean off PCB with soldering flux remover
3) Install psvsd v2.1 board into my personal PS Vita 3G console with my personal 256GB microSD card
4) Ensure that the board's blue LED blinks on boot (faulty cards, or cards without the "card detect fix", will light up solid blue)
5) Launch molecularShell and confirm 256GB microSD card is detected and mounted as ux0
6) Power off, remove 256GB microSD card, remove psvsd v2.1 board and prepare for shipping

Pictures show the clone next to an authentic that was shipped to me directly from Yifan Lu (the authentic is NOT for sale). 256GB microSD card also NOT for sale, however you can find an authentic one by Silicon Power shipped and sold by Amazon for around $117.

I have taken the time to inspect the PCBs and ensure there are no solder bridges. For the ones that did have bridges (roughly 1/5th of what I received from supplier), they have been removed from sellable inventory.

Until I can find a reliable manufacturer to produce psvsd boards, I cannot offer these at a price lower that what is listed. I also cannot offer any with the "molecule" logo until that time either. 

What you will receive is one psvsd v2.1 clone and two screws to replace the original screws. Yifan Lu also shipped his adapters with the same replacement screws. I felt it would be a disservice to ship the boards without new screws, so I hunted down screws of the same specifications and am providing them free of charge. 

Trust me when I say you WILL need these screws. The stock screws are in tight and strip out easily. Or, if you're extra unlucky (like me) you'll have T4 screws... I had two different T4 drivers that did not fit, so I had to cut flathead screwdriver slots into them with a dremel. If you decide to take a dremel to your screws, be sure to mask off the PSVita motherboard to protect it from metal dust. Please see the last two photos of this listing for an example.

The psvsd v2.1 board will be shipped in an antistatic bag. The screws will be in a small sealable plastic bag and taped to the outside of the antistatic bag. They will be shipped out in a bubble mailer for safe delivery. 

An installation guide can be found here: 
https://youtu.be/NSIjeeGirxc 

Drivers, driver installation guide and further details can be found here: 
http://psvsd.henkaku.xyz

This item is only compatible with PS Vita 3G+Wi-Fi consoles on firmware 3.60 running Henkaku. It will NOT work on other consoles or firmwares. 

If you purchase one from me and need help getting yours to work, message me and I can provide instructions. But chances are, if you've found this listing, you already know how to use this.