7 Tier Maypole Acrylic Cupcake Stand Cup Cake Tower Tree

Item Description

The 7 Tier Maypole Cupcake Stand is our best selling 7 tier cup cake stand. It is held together by central rod fixed with screws for strength and stability.


The entire size:

Length 14.12" Width 14.12" Height 25.6"

Length 375 * Width 375 * Height 635mm 

Tier1: Dia 150mm, (5.9")

Tier2: Dia 187mm, (7.7")

Tier3: Dia 225mm, (9.0")

Tier4: Dia 265mm, (10.6")

Tier5: Dia 300mm, (12.0")

Tier6: Dia 340mm, (13.5")

Tier7: Dia 375mm, (14.12")


# 1st,2nd,3rd,4th,5th,6th tier is 4mm (0.16") thick, 7th tier is 5mm (0.2") thick

Packaging: 

Flat packed in cardboard carton, each component is protected.

Contents: 

Tier plates x 7

Rod pillars x 6

Screws x  7

Assembly Instructions: very simple and quick to assemble. Simply fasten each screw to the corresponding rod, there is no need for glue or other fixings/hardware.

The four small round rubber feet are included.They are used to level up the plate from the table to avoid unnecessary scratches.

Can be taken apart, washed and stored away for another time. This cupcake stand can be used as a 7 tier stand or you can remove the top plates and use it as a 6 tier, 5 tier, 4 tier etc.

Below you will find an example of how many cupcakes can be arranged on each tier.

Parts: Acrylic discs, head screws, double screws, acrylic rods and rubber feet.

* Remove the manufacturer’s protective cover from BOTH side of each acrylic component.

* Begin by placing the feet to the underside of the bottom disc ensuring they are evenly spaced.

* Take a metal head screw and place it on to a flat surface where the stand is to be constructed

* Carefully line up the hole(s) of the largest disk with head screw ensuring the disc is resting securely on the rubber feet.

* Now screw the first rod onto the screw thread of the head screw making sure the acrylic disc is clamped firmly between two components.

* Continue by placing the next largest disc on to the screw thread of rod and tighten each piece as you go.

* The final rod is to be used as the supposed for the top tier and the stand is completed by adding the other screw cap into the top.


CARE GUIDE:

* The stand is made from acrylic which will scratch if it is not looked after properly.

* To clean the product use warm water with a little washing-up liquid and soft cloth.

 * Do not use any abrasive cleaning products as they will make the acrylic.

 * Do not put the stand in a dishwater

 
No Cakes are included just stand.
 
Please Note: Postcodes that fall Outside UK Mainland will cost more. Please contact us before placing the order if your postal code falls outside UK mainland.

 

 

Payment Policy

  • Only PayPal is Accepted
  • Immediate Payment is required after the Winning Bid
  • Item will be shipped immediately on the same or next business day of receiving full payment

Shipping Policy

 

  • Any orders from outside UK mainland will cost more so please contact us before hand.
  • Paypal Confirmed Addresses Only
  • Items Will be Shipped by Royalmail or courier company.

 

Returns Policy

  • This Item is Brand New boxed.
  • Actual Images of item are shown above
  • Returns accepted if items arrived damaged.







10 x Sets 2 or 3 Tier Cake Plate Stand Cupcake Fittings Silver Wedding Party 5 TIER SQUARE CUPCAKE CAKE STAND ACRYLIC WEDDING CAKESTAND - TOP QUALITY UK MADE Item Description*To make your own cake stands* Color: silver, chrome plated*Material:  Zinc alloy*Easy installation*Height: about 32cm (3-level tiered stand), 21 cm (2-level cake stand).*11cm Rod/Tier (shoulder to shoulder) length,15mm thread length.*1 set included:  3 Handles + Kit*Metal washer: 1.4(OD) x 0.6(ID) x 0.05cm*Foam washer: 1.6(OD) x 0.6(ID) x 0.1cmPackage*10 x Sets 3 Tier Cake Stand Center Handle (Plate is not included) ALL MADE FROM 3mm THICK - QUALITY UK ACRYLIC - ALL WITH MIDDLE SUPPORT LEGS!! Large 5 Tier Square Cake Stand - Modern Supports - £10.99Can also be used as a combination of smaller stands or cake plates FIRST SOME IMPORTANT DETAILS: (please also see item description below for more information) ALL our stands have MIDDLE legs on ALL of the supports, VERY IMPORTANT for stability and strength. Precision purpose-designed stands to provide super strong, stable and sturdy support. We have designed every single piece to slot together accurately, to eliminate any wobbles or potential disasters on your special occasion. Some sellers are misleading about the amount of cakes that can be displayed on the stand, often giving the numbers for small or mini cakes rather than regular sized cupcakes (approx.70mm).Please check measurements before buying, you will find ours is a very honest representation. Please see the full description below for all measurements and other useful information. Thank you for looking.* * * * * * * * * * With its Modern design, this stand features bold, clean-cut edges and chic straight lines for a simple, contemporary look. As part of our Large Range this stand has been designed to provide extra large tier sizes compared to most others on ebay. Perfect for large parties or events, or just if you want to display lots of cakes with fewer tiers. This Large 5 Tier Square Stand is made from the finest quality 3mm thick crystal clear UK acrylic and has been precision designed to provide an attractive sturdy display stand for your cupcakes. We have designed every single piece to slot together accurately to eliminate any wobbles or potential disasters. ALL our stands have MIDDLE legs on ALL of the supports, VERY IMPORTANT for strength and stability. We have tested a wide range of other cupcake stands available online. We have yet to find one more stable and reliable than ours. It comes with a 6 inch flat top perfect for holding a larger cake(ideal for putting a wedding cake on your top tier.) Christmas xmas gift present muffin fairy cakes butterfly gold silver Lakeland jml small medium large big extra free Multifunctional 5 in 1 Cake Stand and Dome | Cake Dome, Punch Bowl, Salad Bowl Description: Reasons why our cake stands are the best sellers & why you will love yours. PLUS - FREE UK mainland delivery as a huge bonus.* Many payment options available inc credit/debit card - Call 01267 281517, we are here to help. Your cake stand will have a large 6 inch flat top tier      -  Perfect for larger cutting cakes or smaller cupcakes. Super strong, crystal clear top premium grade acrylic   -  Perfect strength for heavy Fruit cakes, large muffins etc Each tier interlocks into the tier below for total stability - Perfect for peace of mind, no wobbly single use stand here. Multi use cake stand - Use as many tiers as you need    - Perfect for any size occassion, see photos of 2,3,4,5,6 and 7 tiers in use. Use nearly every inch of every tier Including the centre - Perfect to use all the space, not just the edges like some stands.UK made using the latest technology  Perfect style, giving you elegance and beauty on EVERY SINGLE PART. Low cost, best quality cake stand   Perfect for all budgets and any event.Super fast FREE UK DELIVERY*. Often very next day     - Perfect for that last minute event, no need to worry or wait days. Large tier sizes, see full tier sizes below. Perfect for all those extra cakes. :-)Photos are of the stand you will get, & give you a helpful guide to get the best out of your stand. The photos are all from 1 x 7 tier circle stand just removing tiers like you can do with yours.  Tier Sizes Top Tier is 150mm / 6 Inch (holds 6 inch cake as standard) ( 6 cakes)Second Tier is 187mm / 7.5 inch  (9 cakes)Third Tier is 225mm / 9 inch (12 cakes)Forth Tier is 263mm / 10.5 inch ( 16 cakes)Fifth Tier is 300mm / 12 inch (20 cakes)Sixth Tier is 337mm / 13.5 inch (27 cakes)Seventh Tier is 374mm / 15 inch (34 cakes) (MORE OR LESS CAKES CAN BE HELD DEPENDANT ON SIZE, TIER SIZES ARE APPROX)