  |
| Features & Specifications: |
- Double-sided SMT Epoxy PCB
- Power Handling:
- 200 x 1 at 4-Ohm
- 350 x 1 at 2-Ohm
- 500 x 1 at 1-Ohm
- Painted Conformal Coating PCB Board
- 1-Ohm Stable Circuit
- 1-Ohm 500w RMS
- Efficiency: 86% 4-Ohm at 100Hz
- 12dB/Oct Variable Crossover Slope
- Multi-way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection)
- Input Sensitivity: 15V-0.5V
- Variable Bass Boost: 0-9dB
- Variable Low Pass Filter: 35Hz-160Hz
- 10 Gauge Power Supply Connectors
- Signal to Noise Ratio: >90dB
- Damping Factor: +100
- Tested Voltage and THD: 14.4V and Less Than 2% THD
- Operating Voltage: DC 10V - 16V Power Input Wired Remote Controller
- Dimensions: 3.5" W x 8" L x 1.5" H
AW.10D2 - Precision Power 10" ATOM 1000W Dual 2-Ohm Subwoofer
Intriguing from the first look, ATOM subwoofers offer more than what meets your eyes…
The first thing you noticed was the wild dustcap; it’s not just for your viewing pleasure. The three fins brace the cone and eliminate cone flex during high excursion. And since they are aluminum and couple to the voice coil, they act as a heatsink or heat extractor. Essential to keeping the subwoofers more relaxed and helping them last longer.
ATOM subs use a composite sandwich cone with a polypropylene surface for durability and Spruce pulp backing for smooth low bass. This new series for Precision Power will use an aluminum dust cap that couples to the voice coil former and extends over the cone. Sparing no compromise, the ATOM series’s motor assembly includes an extended tap top plate, which expands the magnetic field results in dynamic sounds & performance quality you demand and expect. ATOM subwoofers are engineering to be a pinnacle of Precision Power, delivering you absolutely state-of-the-art mobile audio.
FEATURES:
Cast Aluminum Heatsink Dust Cap - Absorbs & Dissipates heat directly from the thermal voice coil
Aluminum Dust Cap Streght's Rigidity - Eliminates flex & eradicated distortion during the intense excursion
Dual Poly-Cotton Suspension for Magentic Gap - Dampens violent acceleration ensuring diaphragm alignment
Hot Forged 1 Piece T-Yoke w. Center pol & Back Venting - Venting milled into the T-Yoke & Backplate removed by Convention Transfer
SPECIFICATIONS:
- RMS Power - 500W RMS
- Mounting Depth 5.50"
- Fs (hz) 29.24
- Qms 5.86
- Vas (ft^3) 26.85
- Cms (mm/n) 157.62
- Mms (g) 179.45
- Xmax 22.5
- Dia (in.) 10″
- Sd (in^2) 1.00Ft³
- Vd (ft^3) 2.00Ft³
- Qes .67
- Re (Ohms) 3.93
- Z (Ohms) 4
- Pe (Watts) 1,000
- Qts .61
- SPL 1W/1M 82.20dB
- VC DIA (in.) 2.5”
- VC (Ohms) 2Ω DVC
- Mounting Depth 5.50″
| International Shipping: |
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
| : |
Each and every product for sale on ebay.com by woofersetc is covered under a (1) One Year Warranty, and can be returned for a period of (1) one year for warranty service. If you have purchased a product from us within the last one (1) year, and it is failing to perform as intended by its manufacturer, please email customer service. You will be issued a Return Authorization Number. Returns will not be accepted without a previously issued RA#.
In order to maintain an inventory of 100%, Brand New, A-Stock, untouched products, all sales are final. We ask that you please be sure you are ordering the correct product.
Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.