- Store categories
- Authorized Brands
- PoE Over Coax
- PoE Switch
- PoE Splitter
- Wireless
- Camera Kit
- Linovision Camera
- IOT
- Video Intercom System
- Other
LINOVISION EOC&POE converter transmits IP Video & Audio & Data & POE Power over coax cable.Upgrade traditional analogue video surveillance system to IP surveillance system without replacing coaxial cable. It is working with POE IP camera, POE Wi-FiAP, VoIP phone, etc.Plug-and-play.Configuration free.
LINOVISION EOC&POE converter transmits IP Video & Audio & Data & POE Power over coax cable.Upgrade traditional analogue video surveillance system to IP surveillance system without replacing coaxial cable. It is working with POE IP camera, POE Wi-FiAP, VoIP phone, etc.Plug-and-play.Configuration free.
Unique Features Compared with Competitors
Unique Features Compared with Competitors
General EOC Applications
Upgrade traditional analogue video surveillance system to IP surveillance system with existing coaxial cable at max 3,000ft distance.Up to100Mbps bandwidth over 1,000 feet regular coax cable transmission, working with CCA/CCU RG59/RG6 cable
Over Twisted Pair Cable
Application for Non-POE
For VoIP Phone
For DC12V Device
Long Reach PoE
Application in Elevator
It can transmit POE power and IP data over coaxial or twist pair cable. One passive EOC-transmitter will be put inside the elevator cart to feed camera or signal board, and one EOC-receiver will be in the control room, powered by POE switch/POE injector/POE NVR.
Q&A
Q：Why my POE device is offline when working with our EOC (IP Over Coax) Converter?
A：Several main reasons are as follow:
1.Reverse connection.
2.Point-to-point coax cable direct connection ONLY.
3.Insufficient load capacity: Suggest 802.3at (PoE+)
4. No power supply.
Q：What kind of cables can be connected between EOC transmitter and EOC receiver?
A：It can transmitter ethernet data and POE power over coaxial cables, twist pair cables, power cables, video cables or almost any two-pin cables.
Q：Do EOC Receiver & EOC Transmitter need power?
A：They do not need extra power. Just connect as the connection pictures have shown.
Q：Will this work for extending connectivity between a router and an Ethernet switch? Or extending WIFI?
A：Yes. But you need a POE injector in EOC receiver side to provide power to EOC receiver and EOC transmitter. It is recommended to use 56V 30W POE injector.
Q：Can multiple devices be connected via single coaxial cable?
A：Yes. The connection will be multiple device -> NVR/POE switch/WI-FI AP -> EOC Transmitter -> Coaxial cable ->EOC Receiver -> POE NVR/POE Switch/POE Injector with internet.
For DC12V Device
Long Reach PoE
Application in Elevator
It can transmit POE power and IP data over coaxial or twist pair cable. One passive EOC-transmitter will be put inside the elevator cart to feed camera or signal board, and one EOC-receiver will be in the control room, powered by POE switch/POE injector/POE NVR.
Q：Why my POE device is offline when working with our EOC (IP Over Coax) Converter?
A：Several main reasons are as follow:
1.Reverse connection.
2.Point-to-point coax cable direct connection ONLY.
3.Insufficient load capacity: Suggest 802.3at (PoE+)
4. No power supply.
Q：What kind of cables can be connected between EOC transmitter and EOC receiver?
A：It can transmitter ethernet data and POE power over coaxial cables, twist pair cables, power cables, video cables or almost any two-pin cables.
Q：Do EOC Receiver & EOC Transmitter need power?
A：They do not need extra power. Just connect as the connection pictures have shown.
Q：Will this work for extending connectivity between a router and an Ethernet switch? Or extending WIFI?
A：Yes. But you need a POE injector in EOC receiver side to provide power to EOC receiver and EOC transmitter. It is recommended to use 56V 30W POE injector.
Q：Can multiple devices be connected via single coaxial cable?
A：Yes. The connection will be multiple device -> NVR/POE switch/WI-FI AP -> EOC Transmitter -> Coaxial cable ->EOC Receiver -> POE NVR/POE Switch/POE Injector with internet.